|
Фрагмент инструкции
USB MONITOR OUT COMPUTER IN 1( Y/PB/PR ) COMPUTER IN 2 CONTROL S-VIDEOVIDEOVIDEO IN R - AUDIO - L AUDIOINAUDIOOUT TLP-X10U SAFETY CONTENTS 2 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the WARNING: TO REDUCE THE RISK EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. VOLTAGES ARE PRESENT INSIDE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. FCC Radio Frequency Interference Statement Note: This equipment has been tested and to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiates radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a presence of uninsulated “dangerous residential area is likely to cause harmful interference in which case the user voltage” within the product’s will be required to correct the interference at his own expense. enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: Changes or modifications made to this equipment, not expressly approved by Toshiba, or parties authorized by Toshiba, could void the user’s authority to The exclamation point within an operate the equipment. equilateral triangle is intended to alert the user to the presence of important operating and Notice: This Class A digital apparatus complies with Canadian ICES-003. maintenance (servicing) instructions Cet appareil numerique de la classe A est conforme a la norme NMB-003 du in the literature accompanying the Canada. appliance. CAUTION: Laser beam is emitted when the laser button of the remote control is pressed. Do not look from the front of the remote control. Do not face toward a person or to a mirror. Before use IMPORTANT CONTENTS 3 Save Original Packing The original shipping carton and packing materials will come in handy if you ever have to ship your LCD projector. For maximum protection, repack the set as it was originally packed at the factory. Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit a long time. They will mar the finish. In the spaces provided below, record the Model No. located at the bottom LCD projector. Model No. Serial No. Retain this information for future reference. Before use Moisture Condensation Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change in temperature. CONTENTS 4 IMPORTANT INSTRUCTIONS CAUTION: PLEASE READ AND 1. Read Owner’s Manual 3. Source of Light OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. After unpacking this product, read owner’s manual carefully, and follow all the operating and other instructions. 2. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. Do not look into the lens is on. The strong light from the may cause damage to your eyes or sight. 4. Ventilation Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. Before use Continued IMPORTANT INSTRUCTIONS CONTENTS 5 5. Heat The product should be away from heat sources such heat registers, stoves, or other products (including amplifiers) that produce 6. Water and Moisture Do not use this product near water – f...
Эта инструкция также подходит к моделям:Проекторы - Conference Room Projectors TLP-X11U (3.57 mb)
Проекторы - Conference Room Projectors TLP-X20U (3.57 mb)
Проекторы - Conference Room Projectors TLP-X21U (3.57 mb)
Проекторы - TLP-X10U (3.57 mb)