Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
The power cannot be turned back on during this time. Unplugging the power cord at this time will shorten the lamp’s duration life. The cooling fan continues to run for a while to expel the heat remaining inside. If you are in a hurry, however, you may unplug the power cord at this time. The standby mode is set. 1 2 (Green) (Green) (Green) (Off) (Off)(Off) Flashing(Orange) (Orange) A B C ON LAMP FAN ON LAMP FAN ON LAMP FAN(Orange) ON/STANDBY ON/STANDBY ON/STANDBY ON/STANDBY B C A Notes • The projector consumes about 20W of power in the standby mode. We recommend you unplug the power cord when not using the projector for long periods of time. • Be sure that the LAMP indicator has turned off before unplugging the power cord. Cutting the power by unplugging the power cord while the projector is operating or the light source lamp is being cooled will shorten the lamp’s duration life. Should a fault or some other irregularity arise with this unit, unplug the power cord. • When reinserting the power plug before the lamp has cooled, please wait until the lamp has cooled sufficiently before use. When the lamp is at a high temperature, it may not light and it’s life duration will be shortened. Adjusting the picture automatically CONTENTS 34 MENU ON / INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY Remote control 2 Control panel (Main unit side) 2 KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON You can adjust the optimum horizontal position, vertical position, sampling phase and sampling frequency for projecting analog RGB signals at the touch of a button. Operations 1 2 AUTO SET AUTO SET Input full screen video signals from the input source (computer) and project the image. Adjustments may not be performed properly for images that are not displayed on the entire screen or for extremely dark images. Press AUTO SET. The horizontal position, vertical position, sampling phase and sampling frequency are adjusted automatically. The icon appears during signal processing. Notes • Automatic adjustment may not be performed properly for signals other than those computers’ signals with which the projector is compatible. • The horizontal position, vertical position, sampling phase and sampling frequency can also be adjusted from the menu screen 47 . * Sampling frequency Analog RGB signals input from the computer are converted into digital signals inside the projector. The sampling frequency is the number of times per second the analog signals are converted into digital signals. In order to capture (sample) each individual dot of the computer’s signals, the sampling frequency must be adjusted to match the computer’s dot clock frequency. If this adjustment is off, details of the image details may be blurred, a striped pattern may appear if images with many vertical lines are displayed, or the image’s width may change. For computer signals with which are projector-compatible, the sampling frequency is adjusted automatically even when the AUTO SET button is not pressed. * Sampling phase The sampling phase is the timing at which the computer’s analog RGB signals are sampled. If the sampling phase is off, the individual dots cannot be sampled at the proper timing, resulting in blurred or flickering images. Correcting the keystone distortion CONTENTS 35 A picture may be expanded on the upper side if projected upward from the projector lifted up by the foot adjuster. The projector can correct this keystone distortion. Before correction After correction Remote control 1 2 3 Control panel (Main unit side) 2 31 3 Confirm the keystone distortion. When no more adjustment is needed, press the EXIT button repeatedly until the menu disappears. If the keystone distortion has not been corrected properly, adjust it according to the next procedure. EXIT EXIT Continued MENU ON / INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY Operations1 Press KEYSTONE. The keystone adjustment menu appears, with the “Auto. V- keystone” being selected. (This menu is the same as the submenu which is displayed when “Correct the keystone distortion of the screen” is selected from GUIDE MENU. 45 ) KEYSTONE KEYSTONE Press ENTER. The vertical keystone distortion on the picture projected is automatically corrected. The icon appears while the keystone correction is executing. When the correction is finished, the menu for selecting “V-keystone” or “H-keystone” by manual adjustment appears, with the former being selected. ENTER ENTER 2 KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON Correcting the keystone distortion (continued) CONTENTS 36 Remote control 4,5 6 Control panel (Main unit side) MENU ON / INPUT ENTER CT-90113 KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON 4,5 6 Operations 4 If the screen is not installed vertically, “Auto. V-keysto...
Эта инструкция также подходит к моделям:Проекторы - TLP-380 (2.05 mb)