Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Chapter 1 Preparation Features Web Management function (+p.31) With this function, you can monitor projector functions such as power status, lamp status, input mode, signal condition, lamp-use time, etc. through the network by using the web browser installed on your computer. PC4 PC3 PC6 PC5 PC1 PC2 Turn ON PJ2 PJ2 PJ1 E-Mail Alert function (+p.25) The projector sends messages to the registered e-mail addresses when a lamp abnormality or power failure occurs with the projector. This message describes how to solve the cause of the problems. You can take efficient action for quick recovery. PC4 PC3 PC6 PC5 PC1 PC2 You’ve got Mail. PJ2 PJ1 Features Required operating environment for computers When operating the projector via networks, computers should meet the operating environment below. Operating System Windows XP (32bit version), Windows Vista (32bit version), Windows 7 (32bit version) Mac OS X v 10.4 or 10.5 Computer environment Recommended CPU Windows: Pentium III 900MHz or more Macintosh : 800 MHz PowerPC G4 or faster,or 1.8 GHz Intel Core Processor or faster Memory Windows : 64MB (Minimum)/ 128MB or more (Recommended) 128MB or more for Windows XP 1GB or more for Windows Vista or Windows 7 Macintosh : 256MB or more (512MB is recommended) Free disk space 100MB or more Drive equipment CD-ROM drive Display settings Support one of following resolutions; VGA (640 x 480), SVGA(800 x 600), XGA(1,024 x 768) Number of colors: Either of 16 bit (65,536 color 24/32 bit (16.77 million colors)) Network card The computer must provide a 10Base-T or 100Base-TX network card. Web Browser* Internet Explorer version 6.0, 7.0 or 8.0 Netscape Navigator version 7.1 or 9.0 Safari 3.1 * Used to control and set up the projector. The layout of pages in the browser may slightly differ from each type of application or operating system you use. Recommended Internet Mailer* - Microsoft Outlook - Microsoft Outlook Express - Netscape Mail * Required the internet e-mail application software to receive an e-mail alert sent from this projector. If you do not use the function E-mail Alert, this application is not required. Network specifications of the projector LAN Terminal Data communication standards 10Base-T (10Mbps) / 100Base-TX compatible Protocol TCP/IP Cabling Between the Projector and a Hub or computer*1 Use an appropriate cable when connecting the projector and a hub or computer. Connection Ethernet cable type Max. cable length Projector - Hub STP straight-through category 5 *2 cable 100m (328feet) Projector - Computer STP crossover category 5*2 cable 100m (328feet) *1 There may be other limitations depending on your network environment or LAN specification. Please consult your network administrator for further details. *2 Cable category indicates cable quality. Notice Expression/Abbreviation The OS of the computer and the Web browser described in this manual are Windows XP Professional and Internet Explorer 6.0. In case of another OS or Web browser, some instruction procedures may differ from the actual operation depending on your computer environment. Use of this manual This manual does not provide the detailed description of basic operation and functions for computer, web browser, projector and network. For instructions about each piece of equipment or application software, please refer to the respective manual. Trademarks Ethernet is a registered trademark of Xerox Corporation. Microsoft, Windows, Windows NT, Windows XP, Windows Vista and Windows 7 are registered trademarks of Microsoft Corporation in the United States and other countries. Internet Explorer is a registered trademark of Microsoft Corporation. Netscape Navigator and Netscape Communicator are trademarks or registered trademarks of Netscape Communications Corporation. JavaScript is a registered trademark of Sun Microsystems, Inc. Macintosh is a registered trademark of Apple, Inc. in the USA and other countries. PowerPC is a registered trademark of IBM Corporation. Intel Core is a registered trademark of Intel Corporation in the USA and other countries. Other product or brand names in this manual are registered trademarks or trademarks of their respective owners. * Unauthorized use of a part or whole of the contents in this manual is prohibited. * The contents of this manual are subject to change without notice. Flow of installation Flow of installation To use the projector via the networks, follow the setup procedures below. STEP 1 Connect the LAN and set the configuration. Decide depending on the LAN environment. . “2. Setup Procedures” (pp.11–16). Detailed LAN configurations need to be done with a browser later. First, complete the Wired LAN connection between computers and projectors, then start browser configurations. . “3. Basic setting and operation” (pp.17–30). STEP 2 Network Configuration has completed. Follow each chapter to operate the projector. ¦ Operate and manage the projector . “4. Controlling the projector” (pp.31-43) . “Power Control and status che...
Эта инструкция также подходит к моделям:Проекторы - LV-7290 (4.56 mb)
Проекторы - LV-7390 (4.56 mb)
Проекторы - LV-8225 (4.56 mb)