• : This mode is suitable for text work. • : This mode is suitable for viewing a movie. • : This picture mode is optimized for playing games. E3 In mode, the text in still pictures will appear unnatural. • : This is a customized mode you create using the ^ function. □ and modes are only enabled if the input signal is a PC Timing (D-Sub/ HDMI) signal. E3 Each mode has separate controls for , , , , etc. When you access a mode and change (for example) the , you are changing the contrast for that mode only. : Used to adjust the contrast between the object and the background. : Used to adjust the brightness of the entire picture. : Used to adjust the sharpness of the picture. E3 When the input signal is a PC Timing (D-Sub/HDMI) signal, the cannot be adjusted. : Used to adjust color lighter or darker. □ When the input signal is a PC Timing (D-Sub/HDMI) signal, the cannot be adjusted. : Used to obtain more natural color by enhancing the amount of green or red in images. 1 E3 When the input signal is a PC Timing (D-Sub/HDMI) signal or PAL and SECAM signal in the [AV] modes, the cannot be adjusted. : The tone of the color can be changed. • Factory defaults: , , , • You can select the color temperature for the items below according to your preferences. , , : Adjusts the color temperature of the White level. , , : Adjusts the color temperature of the Black level. • ------ : Changes the brightness characteristic for each color tone of an image. • The larger (+) the value, the greater the contrast of the bright and dark parts. The smaller (-) the value, the darker the dark parts. • Adjustable range: -3 to +3 : You can save the status of a screen you adjusted according to your preferences using the ^ OSD. : Restores the mode settings to the factory defaults. Size Using this function, you select a screen size. E3 When the input signal is a PC Timing (D-Sub/HDMI) signal, / is not supported. • ---<16 : 9> Using 3-5 MENU DESCRIPTION Position Using this function, you can adjust the screen position if it is not aligned. To adjust, select the direction you want to move the screen, and then press the arrow button pointing in that direction repeatedly. Digital NR If dotted lines appear in an image or the screen shakes, enabling Digital NR (Noise Reduction) can improve the quality of the picture. E3 When the input signal is a PC Timing (D-Sub/HDMI) signal, does not operate. Black Level If the black level is unsuitable for the input signal, the dark parts of an image may look unclear or dim. Using this function, you can select a black level that can improve the visibility of the dark parts. E3 The can only be set for the 480i and 576i RGB signals in the [AV], and AV Timing (D-Sub) modes. For [AV], and the 480i and 576i signals of AV Timing (D-Sub). • <0 IRE> : Sets the black level to <0 IRE>. • <7.5 IRE> : Sets the black level to <7.5 IRE>. For the RGB signal of mode. • : Used in a normal environment. • : Used when the dark parts of an image are too bright. Overscan Using this function, you can cut off edge of the a picture when unnecessary information or images appear on the edge of the picture. Overscan is not supported in [AV] modes. E3 Overscan is supported only when the input signal is an AV Timing (D-Sub) or AV Timing (HDMI) signal. E3 If is turned off, unnecessary extra parts at the edges of an image may be shown. In this case, turn on. Film Mode Using this function, you can set the display mode so that it is optimized for playing movies. • - □ is only be supported for the [AV], 480i, and 576i of AV Timing (D-Sub) signals. PC For PC signals, the four PC functions eliminate or reduce noise that causes unstable screen quality, such as screen shaking. If the noise is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine Adjustment again. E3 These functions are only enabled for the PC Timing (D-Sub/HDMI) input of the D-Sub terminal. 1 0 Refer to PC Timing (D-Sub/HDMI). • : Used to adjust the frequency and phase of PC screen automatically. • : Used to adjust the frequency when vertical lines appear on the PC screen. • : Used to fine tune the PC screen. • : Using this function, you can reset the PC menu settings to the factory default settings. Zoom You can magnify the screen to a size you want. • - - - □ This function is only enabled when the input signal is a PC Timing (D-Sub/HDMI) signal. 3-5 Us...
)
