You do not have to change setup. 3. Press the [Advanced] button. Another property window will appear. 4. Click on [Monitor] tab and set the by referring to described in the Supported Resolution/Size Modes table. 5. Click the [OK] button to close the window, and click the [OK] button of the window to close the window. The computer may restart automatically. 6. Shut down the PC and connect to the projector. Process might vary depending on your type of computer or Windows versions. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.) This unit appliance supports up to 24 bits per pixel in Color quality when it is used as a PC monitor. Projected images may differ from the monitor depending on monitor manufacturer or Windows versions. When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If not, there may be signal problems. | Basic Settings | Connecting the Power | Connecting an External Device | 1. Rear of Projector Plug the power cord into the power terminal on the rear of the projector. | Basic Settings | Connecting the Power | Connecting an External Device | Connecting a PC using the D-Sub cable Check that your PC and projector are turned off. Connect the [PC IN (1 or 2)] terminal at the back of the projector to the D-Sub terminal of your PC using the D-Sub cable. - For the supported input signals, refer to "PC Timing(D-Sub/HDMI)". Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the back of the projector to the Audio out terminal of your PC using an audio cable (Not supplied). Connecting a PC using an HDMI/DVI cable Check that your PC and projector are turned off. Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI cable (Not supplied). - When connecting to the HDMI terminal of your PC, use an HDMI cable (Not supplied). - For the supported input signals, refer to "PC Timing(D-Sub/HDMI)". Connect the [PC 1/DVI AUDIO IN] terminal of the projector and the Audio out terminal of your PC using an audio cable (Not supplied). - If connecting with an HDMI/HDMI cable, an audio cable (Not supplied) is not needed. Connecting an External Monitor You can view an image on both your projector and a separate monitor at the same time. Check that your PC and projector are turned off. Connect the [PC IN 1] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable. - When connecting a monitor using the [PC OUT] function, make sure to connect your PC to the [PC IN 1] terminal. - The monitor output which is connected to the [PC OUT] termininal will be normal even if you see a blank screen on your projector. - The [PC OUT] function also operates in standby mode. Connecting an HDMI-Compatible Device First, check that the AV device and your projector are turned off. Connect the [HDMI/DVI IN] terminal at the back of the projector to the HDMI or HDMI/DVI output terminal of the digital output device using an HDMI/DVI cable. - When connecting to the HDMI output terminal of the digital output device, use an HDMI cable. - For the supported input signals, refer to "AV Timing(HDMI)". Connect the [PC 1/DVI AUDIO IN] terminal of the projector to the Audio out terminal of your digital output device using an audio cable (Not supplied). - If connecting with an HDMI/HDMI cable, an audio cable (Not supplied) is not needed. Connecting an AV device using a D-Sub cable First, check that the AV device and your projector are turned off. Connect the [PC IN (1 or 2)] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable. - For supported input signals, refer to the "AV Timing (D-Sub)". Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the back of the projector to the Audio out terminal of your AV device using an audio cable (Not supplied). Connecting a component output AV device First, check that the AV device and your projector are turned off. Connect the [PC IN (1 or 2)] terminal at the back of the projector to the Component terminal of your AV device using a DSub/ Component cable (Not supplied). - For supported input signals, refer to the "AV Timing(D-Sub)". Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the back of the projector and the Audio out terminal of your AV device using an audio cable (Not supplied). Connecting using a Video/S-Video cable First, check that the AV device and your projector are turned off. Connect the [VIDEO] or [S-VIDEO] terminal and the AV device using a Video cable (Not supplied) or S-Video cable (Not supplied). - For supported input signals, refer to the "AV Timing(VIDEO/S-VIDEO)". Connect the [AV IN R-AUDIO-L] terminal at the back of the projector and the Audio out terminal of y...
