The current setting will be displayed on the screen by numerals and a bar. • The adjustment operation and the changes made will vary depending on which adjustment item is selected. Refer to the table below for details. Adjustment function display / Numeric adjustment level display Bar display Adjustment Item Button Adjustment Details Adjustment Range Remarks COLOR Press the button. The color becomes darker. Max. value 63 S-VIDEOA/IDEO only Press the u<” button. The color becomes lighter. Min. value 0 TINT Press the button. Flesh tones become greenish. Max. value 63 NTSC, NTSC 4.43 (S-VIDEO/VIDEO)only Press the button. Flesh tones become reddish. Min. value 0 BRIGHT Press the button. The screen becomes brighter. Max. value 63 Press the button. The screen becomes darker. Min. value 0 CONTRAST Press the button. The screen becomes brighter and the picture becomes darker. Max. value 63 Press the aM” button. The screen becomes darker and the picture becomes lighter. Min. value 0 SHARPNESS Press the button. The picture quality becomes sharper. Max. value 3 S-VIDEOA/IDEO only Press the button. The picture quality becomes softer. Min. value 0 NOTE: • If no button is pressed for approximately 5 seconds while an individual adjustment screen is being displayed, the display will return to the PICTURE screen. • If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed. • Refer to page 22 for details on the TV-SYSTEM settings which appear in the PICTURE screen, and to page 24 for the PICTURE MODE settings. • Refer to the next page for details on adjustment of the WHITE BALANCE R/G/B (W-BAL-R/G/B) settings which appear when RGB signals are being input and the PICTURE screen is being displayed. -25- Adjusting the white balance When RGB signals from a personal computer or other signal source are being projected, the picture may become over-saturated with red or blue color, and the white color may not be at the desired degree of whiteness. In such cases, adjust the white balance by the following procedure. (Only effective when RGB signals are being projected.) Adjustment procedure 5. Press the ENTER, u<" or button to display the W-BAL R individual adjustment screen. 6. Continue pressing the “M” and buttons to adjust the W-BAL R setting The current setting will be displayed on the screen by numerals and a bar. Adjustment func- ^ ^ tion display Numeric adjustment gar display level display Adjustment Item Button Adjustment Details Adjustment Range W-BAL R Press the‘>” button. The red component becomes stronger. Max. value 63 Min. value 0 Press the button. The red component becomes weaker. W-BAL G Press the button. The green component becomes stronger. Press the button. The green component becomes weaker. W-BAL B Press the button. The blue component becomes stronger. Press the button. The blue component becomes weaker. NOTE: • If these adjustments are not made correctly, none of the colors will be reproduced correctly. If you make an error in adjustment so that the colors do not match correctly, press the STD (Standard) button while one of the individual adjustment screens is being displayed. The value and the bar display will appear in yellow and only the item being displayed will be reset to the factory pre-setting. • If the MENU button is pressed, the display will return to the MENU screen, or the MENU screen will be cleared if it is already being displayed. • Separate adjustments can be carried out for RGB 1 and RGB 2. -26- Adjusting the sound to the desired setting You can adjust the volume and balance to the desired settings. Adjustment procedure . COUNT UOWN ,~j I Q О n > F a С U 3 PICT uaKiouflPE 3. Press the and buttons to display the AUDIO screen. 4. Press the “A” and “Y” buttons to select “VOLUME”. • To adjust the balance, select “BALANCE” instead. 5. 6. Press the ENTER, “M” or button to display the VOLUME individual adjustment screen. Continue pressing the and buttons to adjust the volume setting. The current setting will be displayed on the screen by numerals and a bar. • The adjustment range is between 0 and 63. (However, the adjustment range for the balance setting is -32-+31.) • While “VOLUME” is selected, the volume of the sound coming from the built-in speakers and the output level of the signal from the AUDIO OUT terminal will change. • While “BALANCE” is selected, the left and right balance of the sound coming from the built-in speaker and the output level of the signal from the AUDIO OUT terminal will change. Adjustment function display Numeric adjustment level display Bar display NOTE: • If no button is pressed for approximately 5 seconds while an individua...
