Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CONTENTS Package Contents.................................................................... 1 Chapter 1 Introduction..........................................................1 1.1 Overview of the Production ......................................... 1 1.2 Features ...................................................................... 2 Chapter 2 Identifying External Components....................... 2 Chapter 3 Connecting the PoE Injector............................... 3 Appendix: Specifications........................................................5 Package Contents The following items should be found in your package. • TL-POE150S PoE Injector .. One Power Adapter • One Ethernet (CAT5 UTP) Cable • This User Guide • Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. Chapter 1 Introduction 1.1 Overview of the Production Thank you for choosing the TL-POE150S PoE Injector. The Power over Ethernet (PoE*) Injector is able to supply steady power to Powered Device (PD*) or PoE Splitter over the Ethernet cable. The Ethernet equipment can work as a Power Sourcing Equipment (PSE*) with the help of the TL-POE150S connection. PoE technology allows the existing Ethernet infrastructure to transmit electrical power, along with data, to remote IP endpoints over the Ethernet cables, which can greatly save the cost of the external power cables. Your network can benefit from PoE technology for it will ensure the normal working status of your network while keep the existing Ethernet infrastructure secure. 1 *PoE: This technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. *PD: A device powered by a PSE and thus consumes energy. Examples include powering IP telephones, wireless LAN access points, network cameras, network hubs, embedded computers etc. *PSE: A device (switch or hub for instance) that will provide power in a PoE setup. 1.2 Features • Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3af standards • Compatible with PoE compliant PDs and PoE Splitters • Transmits electrical power along with data in one single cable • External 48V DC power supply • Supports Plug-and-Play for the devices, without any configuration • Elegant appearance with space-saving mini size Chapter 2 Identifying External Components POWER+DATA OUT: Connect to the PD or PoE Splitter with a CAT5 UTP cable. 2 LAN IN: Connect to a DC 48V: Connect to the network device (such as a provided power adapter Switch or Router ) with which can supply steady V: Connect to the network device (such as a provided power adapter Switch or Router ) with which can supply steady CAT5 UTP cable. power of 48V DC. PWR: Power LED, a steady green light indicates that the PoE system has detected the PD or PoE Splitter and the power adapter is working properly. Chapter 3 Connecting the PoE Injector You can use TL-POE150S PoE Injector with PD or PoE Splitter to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. The following steps will tell you how to connect the PoE Injector correctly. 1. Use a CAT5 UTP cable to connect port of Ethernet device (such as a switch, hub or router) to the LAN IN port. 2. Please connect the power adapter properly to a power socket with provided power cable, and then connect the other end of the power adapter to the DC 48V port of the TL-POE150S. 3. Connect the POWER+DATA OUT port of the TL-POE150S to a PD or a PoE Splitter with CAT 5 UTP cable. Now, the device can work normally with data and power. There are two schemes to realize the PoE. 1. If the device supports PoE (take an IP camera with PoE for example), following topology will work: 3 Scheme 1 2. If the device does not support PoE, it is necessary to have a PoE Splitter to separate the power and data, transmitting them detached in one UTP cable and one power cable. Here we take TP-LINK TL-POE10R Splitter for example. You can use following topology. Scheme 2 4 • Note: • Do not mistake the power port of the TL-POE150S and TL-POE10R when choosing the Scheme 2, or else it will cause serious damage to your network device. • If you want to know more details about TL-POE10R Splitter, please refer to “TL-POE10R User Guide” on our website Appendix: Specifications Normal Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3af Ports PoE Port 100BASE-TX / 10BASE-T dual purpose portLAN Port Cabling Type RJ45 CAT 5 UTP cable LED PWR Safety & Emissions FCC, CE Environmental and Physical Operating Temp 0.~40. (32.~104.) Storage Temp -40.~70. (-40.~158.) Operating Humidity 10%~90% RH, Non-condensing Storage Humidity 5%~90% RH, Non-condensin...