Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Chapter 6: Creating a Bootable Array . 45 4 Select Initialize Drives, then press Enter. 5 Select at least three disk drives for the array, press Insert for each selected disk drive, then press Enter. ! Caution: During initialization, all data is deleted from the disk. Before continuing, back up any data you want to keep. 6 Press Y, then press Enter. The selected disk drives are initialized, then the ACU screen appears. 7 Select Create Array, then press Enter. 8 Select the disk drives that were just initialized, press Insert for each selected disk drive, then press Enter. 9 When the Array Properties screen opens, follow the instructions in the following table. Property Line Entry or Selection Array Type Select RAID 5, then press Enter. Array Label Type a name, then press Enter. Array Size Press Enter, then press Enter again to use the default granularity of GB. Stripe Size Press Enter to use the default (256 KB). Read Caching Press Enter to use the default (Yes). Write Caching Press Enter to use the default (Enable always). Create RAID via Press Enter to use the default (Build/Verify). [Done] Press Enter. 10 When a cache warning message displays, type Y. 11 Once the array is created, a message displays telling you that the array can now be used. Press any key to return to the ACU Menu. You can start using the array immediately. However, performance is reduced until the build process is complete. 12 Press Esc until the Exit utility window appears. 13 Select Yes, then press Enter. The computer restarts. 14 Continue with Making Your Array Bootable on page 47. Chapter 6: Creating a Bootable Array . 46 Creating an Array with Adaptec Storage Manager This section describes how to use the Adaptec Storage Manager configuration wizard to build a RAID 5 array. Note: You will need the Adaptec RAID Controller Installation DVD to complete this task. To create a RAID 5 array: 1 Insert the Adaptec RAID Controller Installation DVD into your DVD drive, then restart your computer. 2 When prompted, select the language you want, then press Enter. 3 Review the license information, then press Enter. The main menu opens. 4 Click Launch Configuration Utility. Adaptec Storage Manager opens. 5 Click Create. The Configuration wizard opens. Select Express configuration..., then click Next. Chapter 6: Creating a Bootable Array . 47 7 Review the information that is displayed. Note: In DAS environments, Adaptec Storage Manager uses the term logical drives when referring to arrays (see page 12). In this example, Adaptec Storage Manager has used thirteen equal-sized disk drives to automatically create one logical drive with RAID 5 and a hot spare. To exclude specific disk drives from the logical drive, specify a size for the logical drive, or to make other changes to the configuration, click Modify logical devices. 8 Click Apply, then click Yes when prompted to confirm applying your new configuration. Adaptec Storage Manager builds the logical d...
Эта инструкция также подходит к моделям:Прочие комплектующие - Adaptec RAID 5805 (2.49 mb)
Прочие комплектующие - Adaptec RAID 5445Z (2.49 mb)
Прочие комплектующие - Adaptec RAID 5445 (2.49 mb)
Прочие комплектующие - Adaptec RAID 5405Z (2.49 mb)