This information can include (but is not limited to) the following items: . Controller type . BIOS, boot block, device driver, and firmware versions . Logical drive status, RAID level and size, . MaxIQ cache status (enabled/disabled), cache policy (low, medium, high), and read/write balance . Device type, device ID, presence of PFA, SSD status (SSD or not, part of MaxIQ pool, MaxIQ pool compatibility) Chapter 2: Using the Command Line Utility . 16 . Physical device state . Number of Solid State Disks (SSDs) assigned to MaxIQ pool, maximum number of SSDs that can be assigned to MaxIQ pool . Enclosure information: fan, power supply, and temperature status Syntax ARCCONF CONFIG [AD|LD [LD#]|PD|AL] Parameters Controller# is the controller number AD/LD/PD/AL options: . AD—Adapter information only . LD—Logical drive information only . PD—Physical device information only . AL—All information (optional) Example ARCCONF GETCONFIG 1 AD arcconf getlogs Provides access to controller status and event logs and usage statistics, including: . DEVICE—A log of device errors that the controller encountered. . DEAD—A log that records any occurrences of defunct devices. . EVENT—A log of special events that may have occurred (rebuilds, LDMs, etc.). . STATS—A log of controller usage statistics. Syntax ARCCONF GETLOGS [clear|tabular] Parameters Controller# is the controller number. Type is one of the following: . DEVICE . DEAD . EVENT . STATS Clear clears the specified log. Note: This option is valid only for the DEVICE, DEAD, and EVENT log types. Tabular displays the log or statistics in tabular format. Examples ARCCONF GETLOGS 1 DEVICE Chapter 2: Using the Command Line Utility . 17 ARCCONF GETLOGS 1 STATS Tabular arcconf getsmartstats Displays SMART statistics for the hard drives and Solid State Drives (SSDs) on a controller. Note: For more information about SMART statistics, see the Adaptec Storage Manager User’s Guide. Syntax ARCCONF GETSMARTSTATS [Tabular] Parameters Controller# is the controller number. Tabular creates output in tabular format. Examples ARCCONF GETSMARTSTATS 1 ARCCONF GETSMARTSTATS 1 TABULAR arcconf getstatus The GETSTATUS function displays the status of any background command that is currently running. Including information about the most recent rebuild, synchronization, logical-drive migration, and compaction/expansion. The information includes the type of operation, status, logical drive number, logical drive size, and percentage of the operation completed. Note: 1 GETSTATUS reports currently active operations for both ARCCONF commands and commands issued from the Adaptec Storage Manager. 2 GETSTATUS reports verify, clear, initialize, and secure erase operations on physical devices. 3 GETSTATUS only reports active operations. It does not display information if the operat...
