Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Call Wagner toll-free if you have any comments or problems with this Wagner product. Weekdays: Weekends: 8:00 - 4:30 Central time 9:00 - 4:00 Central time 1770 Fernbrook Lane, Minneapolis, MN 55447 1 2 3 4 5 6 7 8 9 Install the batteries Inserer les piles Instalar las pilas Attach the strap Fixer la bandouliere Conectar la correa Remove the drive housing Enlever du logement du mecanisme Extraer el mecanismo impulsor Attach the hoses Fixation des tuyaux flexibles Conectar las mangeras Attach the drive housing Fixation du logement du mecanisme Conectar el mecanismo impulsor Press the on/off switch Appuyer sur le bouton marche/arret Oprimir el boton de encendido / apagado Apply paint Appliquer la peinture Aplicar pintura Fill the fluid tank Remplir le reservoir a liquides Llenar el deposito de fluidos Cleanup Nettoyage Limpieza Read this manual for complete instructions. Ce manuel contient les instructions completes. Lea este manual para obtener instrucciones completas. Table of Contents PRODUCT REGISTRATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PARTS LISTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ASSEMBLING THE ROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing the batteries and attaching the strap Removing and Attaching the Drive Housing to the Fluid Tank Attaching the Fluid Hose Filling the Fluid Tank USING THE ROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pump On/Off Switch Applying Paint CLEANUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Quick Cleanup Detailed Cleanup STORING THE ROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Registration Card Send in your Wagner product registration card. Proper registration will serve as proof of purchase in the event your original receipt becomes misplaced or lost. Returning this card will not affect warranty coverage, but may expedite the processing of your warranty and enable you to contact us in the event of loss or theft. The additional information will also help us to develop new products that best meet your needs and desires. THANK YOU! Accessories 9” x 3/8” roller cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0155206 9” x 3/4” roller cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0155209 9” x 1-1/4” roller cover. . . . . . . . . . . . . . . . . . . . . . . . . . . 0155209 Ball check assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0156270 Check valve assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . 0156276 1 2 3 4 5 6 7 8 9 11 12 13 10 14 15 16 25 24 23 22 21 20 19 18 26 27 17 Parts Listing 1 0156400 Strap Assembly 15 0156421 Adapter, Faucet 2 0156595 Piston 16 0280346 Brush 3 0327312 O-Ring 17 0156607 Container, Fluid 4 0156596 Pump, Upper 18 0156606 Tray, Roller 5 0327226 Clip, Spring 19 0156566 Shield, Splatter 6 0156471 Spring, Anti-kinking 20 0155206 Roller Cover, 3/8" 7 0327327 O-Ring 0155208 Roller Cover, 3/4" Opt. 8 0156579 Pump, Lower 21 0156556 Cap, End 9 0156276 Valve Cap Assembly 22 0156559 Core, Roller 10 0156270 Inlet Valve Assembly 23 0245401 Seal 11 0156582 Retainer, Inlet Ball 24 0156290 Arm, Roller 12 0156464 Ball, Inlet 25 - - - - - -Drive Housing 13 0156580 Body, Valve 26 0156585 Cap, Pump Retaining 14 0016551 Filter 27 0156409 Cover R English 2 ©1997 Wagner Spray Tech. All rights reserved. Assembling the Roller Checking the Inlet Valve If the unit is new or has been stored for an extended period of time Installing the Batteries and Attaching the Strap the inlet ball can become stuck and the pump may be difficult to prime. To check: 1. Open the battery door. The battery door is located on the drive housing. 2. Insert the batteries in the proper direction. +- +--+ -+ CAUTION Improper installation of batteries may cause batteries to overheat and leak acid. Acid may cause severe injury and/or property damage. NOTE: Use high quality alkaline batteries only. 3. Attach the strap to the loops on the drive housing. Removing and Attaching the Drive Housing to the Fluid Tank Close Open 1. Remove the drive housing by turning the drive housing counterclockwise. 2. Attach the drive housing by setting it onto the fluid tank at a 90° angle and turning clockwise. Attaching the Fluid Hose 1. Slide the fluid hose through the anti-kinking spring and the spring clip. 2. Push the fluid hose to the port on the side of the drive housing. 3. Slide the spring clip over the fitting to keep the hose securely in place. 4. Slide the anti-kinking spring up against spring clip. Fluid Hose Inlet Ball 1. Turn the valve body Retainer counterclockwise and pull Ball down to remove. Inlet Ball 2. Shake the inlet valve Inlet Valve Holder assembly gently. If it does Assembly not rattle, remove the inlet ball retainer and clean the ball. 3. Reassemble the inlet valve. Filling the Fluid tank 1. Place the drive housing on the fluid tank at a 90° angle. 2. ...