Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
Si tiene dudas o comentarios, contactenos. 1-800-4-DEWALT • INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA INSTRUCTION MANUAL DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. GUIDE D'UTILISATION MANUAL DE INSTRUCCIONES DW073 Cordless Rotary Laser Laser rotatif sans fil DW073 DW073 Laser rotatorio inalambrico IF YOU HA VE ANY QUESTIONS OR COMENTS ANY D EWALT T OOL, CALL US T OLL FREE A T : 1-800-4-DEWALT (1-800-433-9258) Introduction The DW073 Cordless Rotary Laser is a manually that can be used both inside and outside for horizontal (plumb) alignment projects. This tool comes fully Applications range from acoustical ceiling installation and to foundation leveling and deck building. This tool has been with many innovative features that allow for quick and easy adjustment which will increase your productivity on the job. Please read and understand all instructions within this manual prior to use. General Safety Rules For BatteryOperated Tools WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY • A battery operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. 1 • Use battery operated tool only with the specifically designated battery pack. Use of any other batteries may create a risk of fire. PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught in moving parts. Air vents often cover moving parts and should also be avoided. • Avoid accidental starting. Be sure switch is in the locked or off position before inserting battery pack. Carrying tools with your finger on the switch or inserting the battery pack into a tool with the switch on invites accidents. • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. • Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. TOOL USE AND CARE • Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to a loss of control. • Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with the switch is dangerous and must be repaired. • Disconnect battery pack from tool or place the switch in the locked or off position before making any adjustments, changing accessories, or storing the tool. Such preventative safety measures reduce the risk of starting the tool accidentally. English English • Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. • When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire. • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. • Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may create a risk of injury when used on another tool. SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. Additional Safety Rules WARNING! DO NOT DISASSEMBLE LASER LEVEL. There are no user serviceable parts inside. Disassembling the laser level will void all warranties on the product. Do not modify the product in any way. These devices comply with Part 15 of the FCC Rules. Operation is subject to the f...