3636.ST 36" x 36-3/16" (914 x 919mm) 3636.NEO 60-1/8" x 34-1/8" (1527 x 867mm) 4242.ST 6034.ST 3838.NEO 4242.NEO 42-1/8" x 42-1/8" (1070 x 1070mm) 4834.ST 48-1/8" x 34-1/4" (1222 x 870mm) 36-1/4" x 36-1/8" (921 x 918mm) 4832.ST 48" x 32" (1219 x 813mm) 6032.STRH 6032.STLH 60" x 32" (1524 x 813mm) 60" x 32" (1524 x 813mm) 38-1/8" x 38-1/16" (968 x 967mm) 42-1/4" x 42-1/8" (1073 x 1070mm) 34-1/4" (870mm) 16-3/4" (425mm) 24-1/16" (611mm) 48-1/8" (1222mm) 4834.ST 6034.ST 3838.NEO 4242.NEO 38-1/16" (

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. ACRYLIC SHOWER BASE MODELS: 3232.ST, 3636.ST, 4242.ST, 4832.ST, 4834.ST, 6032.STLH, 6032.STRH, 6034.ST, 3636 NEO, 3838.NEO, 4242.NEO For alcove (.ST models) installation only: The opening dimensions should be 1/8" larger than dimensions shown. Installation Instructions 751817-100 Rev. Q Certified to comply with ANSI Z124.2. Observe local plumbing and building codes. SPECIFICATIONS: Prod

This will be installed after shower base is in its final position. Install the drain to the shower base as shown in Fig. D. Use silicone sealant between drain body and shower base. Secure the base to the studs as shown, using the screws and the brackets provided. See Fig. G. Note: Allow the bedding material to completely harden before applying weight to the bottom of the shower base. Draw a line 6-5/8" (159mm) from the sub-floor on to the studs at each side of the opening. Using this line and a

Using this line and a level, mark the remaining studs. (See Figs. A & B.) This will be the installed height of the shower base. Mix the low-shrink bedding material (grout, mortar, plaster, etc.). Concrete is not recommended. Apply enough bedding material to support the entire bottom of the shower base. The bedding material must not be used under the apron (front edge). 1 SHOWER BASE 3636.NEO 3838.NEO 4242.NEO 3232.ST 4834.ST 6034.ST 3636.ST 4242.ST 4832.ST 6032.STRH/LH* 5/16" ± 1/16" 3/8" ± 1/16

Provide a 5" x 5" (127mm x 127mm) opening in the floor for the drain (see Figs. A & B). The drain plug accom-modates a 2" (51mm) PVC waste pipe. The waste pipe should extend above the surface of the sub-floor, refer to chart on page 2 for the required dimensions. See product drawings on this page for the specified drain locations. B 3232.ST, 3636.ST, 4242ST, 6034.ST, 4834.ST, 4832.ST 90° 90° 51 mm (2) PVC Waste Pipe 127mmx127mm (5x5) OpeningC/L (See Product Chart for Drain Location) 6-5/8 Tape o

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. ACRYLIC SHOWER BASE MODELS: 3232.ST, 3636.ST, 4242.ST, 4832.ST, 4834.ST, 6032.STLH, 6032.STRH, 6034.ST, 3636 NEO, 3838.NEO, 4242.NEO For alcove (.ST models) installation only: The opening dimensions should be 1/8" larger than dimensions shown. © AS America, Inc. 2008 751817-100 Rev. QFOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS. CLEANING AND MAINTENANCE D C E F G H DRAIN ASSEM

General Cleaning: Do not use abrasive cleaners; a mixture of warm water and a mild liquid detergent is adequate for most cleaning. Strong detergents formulated for use on tile or porcelain-enamel surfaces should be avoided. Caution: Do not allow liquid detergent containers to remain on base surfaces for more than a few moments. Do not use Lestoil, Windex, Mr. Clean, Dow Disinfectant (spray or concentrate), or Lysol Basin, Tub and Tile Cleaner. Do not allow nail polish remover, dry cleaning fluid

To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. ACRYLIC SHOWER BASE MODELS: 3232.ST, 3636.ST, 4242.ST, 4832.ST, 4834.ST, 6032.STLH, 6032.STRH, 6034.ST, 3636 NEO, 3838.NEO, 4242.NEO For alcove (.ST models) installation only: The opening dimensions should be 1/8" larger than dimensions shown. Installation Instructions 751817-100 Rev. Q Certified to comply with ANSI Z124.2. Observe local plumbing and building codes. SPECIFICATIONS: Prod

Observe local plumbing and building codes. SPECIFICATIONS: Product No. Size: Product No. Size: Product No. Size: NOTE: Read instructions completely before proceeding with installation. 3636.ST 36" x 36-3/16" (914 x 919mm) 3636.NEO 60-1/8" x 34-1/8" (1527 x 867mm) 4242.ST 6034.ST 3838.NEO 4242.NEO 42-1/8" x 42-1/8" (1070 x 1070mm) 4834.ST 48-1/8" x 34-1/4" (1222 x 870mm) 36-1/4" x 36-1/8" (921 x 918mm) 4832.ST 48" x 32" (1219 x 813mm) 6032.STRH 6032.STLH 60" x 32" (1524 x 813mm) 60" x 32" (1524 x