Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
K-12345M) Francais, page “Francais-1” Espanol, pagina “Espanol-1” 1019749-2-M Important Information WARNING: When using electrical products, basic precautions should always be followed, including the following: DANGER: Risk of electric shock. Connect only to circuits protected by a Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD). Building materials and wiring should be routed away from the pump body and other heat-producing components of the unit. Install to permit access for servicing. Install this unit in accordance with the Canadian Electrical Code, Part 1. A pressure wire connector marked .Earth/Ground. is provided within the wiring compartment. To reduce the risk of electric shock, connect this connector to the grounding terminal of your electric service or supply panel with copper wire equivalent in size to the circuit conductor supplying this equipment. Pressure wire connectors are provided on the exterior of the junction box or control within this unit to permit connection of a bonding conductor between this unit and all other exposed metal in the vicinity, as needed to comply with local requirements. Grounding is required. The unit should be installed by a qualified service representative, and grounded. WARNING: Risk of electric shock. A licensed electrician should make all electrical connections. WARNING: Risk of electric shock. Disconnect power before servicing. WARNING: Risk of injury or property damage. Please read all instructions thoroughly before beginning installation, including the following requirements. NOTICE: Follow all local plumbing and electrical codes. Product Information Electrical Requirements The installation must have a Class A Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD). The GFCI or RCD protect against line-to-ground shock hazard. Use a 220 -240 V, 20 A, 50/60 Hz dedicated service for the whirlpool. Product Notices WARNING: Unauthorized modification may cause unsafe operation and poor performance of the whirlpool. Do not relocate the whirlpool pump, or make other modifications to the whirlpool system, as this could adversely affect the performance and safe operation of the whirlpool. Kohler Co. shall not be liable under its warranty or otherwise for personal injury or damage caused by any such unauthorized modification. Features .-N1. Series: Components include a pump, heater, control, shut-off valve, neckjets, pulse cannister, and illuminated switch (user keypad). .-H2. Series: Components include a pump, heater, control and illuminated switch (user keypad). The whirlpool pump and piping are factory-assembled. 1019749-2-M 2 Kohler Co. Product Information (cont.) Connections and Service Access Before installation, ensure proper access to the final connections. NOTICE: Provide generous, unrestricted service access to the pump. You must provide access for servicing the pump and controls. The access must be located immediately next to the pump. Study the roughing-in information packed with the whirlpool. Table of Contents ImportantInformation .............................................................. 2 ProductInformation ............................................................... 2 ElectricalRequirements .......................................................... 2 ProductNotices ................................................................ 2 Features ..................................................................... 2 ConnectionsandServiceAccess ................................................... 3 ToolsandMaterials ............................................................... 3 BeforeYouBegin ................................................................. 4 PreparetheSite .............
Эта инструкция также подходит к моделям:Прочие аксессуары для дома - K-1110 (2.57 mb)
Прочие аксессуары для дома - K-1158 (2.57 mb)
Прочие аксессуары для дома - K-1170 (2.57 mb)
Прочие аксессуары для дома - K-1368 (2.57 mb)