Оценок - 2, средний балл: 3.5 ( )

Производитель: AeroGarden Размер: 770.67 kb Название файла: Язык инструкции:

• Lamp Cord is plugged into Lamp Hood (page 2, step 1D). • You are getting power through electrical outlet. Air bubbles should be visible inside Bowl. If not, check to see if: • Bowl is securely seated on Air Coupling in Base (see page 3, step 1F). • Bowl has water up to “Fill To Here.” What will happen... 3 Starting Your Garden Plug In view Door 1 2 1 Replace Bulb Add Nutrient Replace Bulb Add Nutrient Plug Cord into Electrical Outlet A Your Light Timer B 2 Your Light Timer is Set To Start Growing Your Plants...Starting now! If You Would Like to Change the Time of Day Your Light Goes On... See Page 8. • Your light will stay on for 17 hours and will shut off for 7 hours. • Your light will come on every day at the time you plugged in your AeroGarden 3. Grow Bulb will come on. Look under Lamp Hood to check that bulb is lit. If not, check to see if: • Grow Bulb is properly inserted in Lamp Hood (page 2, step 1C). • Lamp Cord is plugged into Lamp Hood (page 2, step 1D). • You are getting power through electrical outlet. Air bubbles should be visible inside Bowl. If not, check to see if: • Bowl is securely seated on Air Coupling in Base (see page 3, step 1F). • Bowl has water up to “Fill To Here.” What will happen... 3 Starting Your Garden Plug In view Door 1 2 1 Personalize Your Light Timer (optional) Personalize Your Light Timer (optional) ReplaceBulb Add Nutrient Your AeroGarden 3 has a built-in light timer that automatically provides your plants with the optimal amount of “sunlight” (17 hours) and “night” (7 hours). As long as your plants get this amount of light, it does not matter when the light is turned off.* Many people find it convenient to have the light go on in the morning and off at night to match their own wake and sleep schedule. *The exceptions to this are Flower & Vegetable plants. They require a daily dark period in order to produce flowers. If plants will receive any room light during the day (natural or artificial) we recommend setting your AeroGarden 3 light to be on during the day. If you would like to change the time of day your light will go ON… • Decide what time of day you want light to go ON. • AT THAT TIME, unplug AeroGarden 3 and plug it back in. In case of power failure, AeroGarden 3 has a backup system that stores nutrient and grow bulb timer settings. You will need to manually reset the off-on cycle for your light (see above) to return to your previously selected light setting. Now, each day, your AeroGarden 3 light will automatically • Turn on at the time you plugged in your AeroGarden 3• Remain on for 17 hours • Turn off for 7 hours You can reset your timer as often as you want. 8 Basic Reminders About Your AeroGarden Basic Reminders About Your AeroGarden AeroGarden3 control Panel ReplaceBulb Add Nutrient FILLTOHERE REPLACE BULB* When light illuminates (after 6 months of use), it is time to replace Grow Bulb. Order bulbs at or from your retailer. After replacing Grow Bulb, press and hold “Reset” button until “Replace Bulb” light blinks (3 seconds). Release “Reset” button, then press and release again. “Replace Bulb” light will go off and timer is now reset. *See complete replacement instructions on page 11. ADD NUTRIENT (Feed Garden -Basic Feeding) When “Add Nutrient” light illuminates (every 2 weeks), add 1 nutrient tablet and fill Bowl with water up to “Fill To Here.” Press and hold “Reset” button until “Add Nutrient” light blinks (3 seconds). Release “Reset” button, then press and release again. “Add Nutrient” light will go off and timer is now reset. LIGHT On/Off Use to occasionally override built-in light timer. Once pushed, light will stay off/on until the next time built-in light timer is set to go on/off. This will not affect the timing of your light cycle, and oc- casional use of this feature will not harm your plants. REMOvE BIO-DOMES When plants appear through hole in Seed Pod Label, remove Bio-Dome and discard or recycle. note: never remove Seed Pod Labels. WATER LEvEL LOW When water level indicator is RED, add water to “Fill To Here.” “Fill To Here” RESET Use to reset “Add Nutrient” and “Replace Bulb” timers when each light illuminates. Basic Reminders About Your AeroGarden (continued) Unplug AeroGarden 3 and remove Bowl from Base. Hold Lamp Arm with one hand. With other hand, support Lamp Hood and use thumb to push in Locking Button. Release Locking Button while pulling up on Lamp Arm. Locking Button will automatically click into next notch. Replace Bowl on Base and plug in AeroGarden 3. 2 1 3 5 4 Raise lamp Hood (light) As plants grow to 1-2” from light, raise Lamp Hood one notch at a time. Be sure Lamp Arm is in the lowest position when starting your AeroGarden 3. note: When lowering Lamp Hood, be sure to hold Lamp Arm to avoid crushing plants. Basic Reminde...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: