Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Thread the collar onto the stud and tighten. Terrano 37136XX1, Phoenix only Position the spout and sealing ring on the mounting surface. Install the mounting flange. Thread the collar onto the stud and tighten. Install the connecting hoses Push a 3/8" compression nut and ferrule over the end of the connecting hose. Push the end of the hose into the valve outlet. Tighten the compression nut wrench tight. Use two wrenches. Do not allow the connecting hose to twist, or it will become loosened from the spout. All models Install the drain pull rod Finish the installation 7/16"11/16" Finish the installation 7/16"11/16" Install the 1/2" hot and cold supply lines (not included). Install the pop-up drain. 11 Install the pop-up drain Attach the swivel connector to the end of the horizontal rod. Attach the swivel connector to the end of the pull rod. Position as desired and tighten with a small, flat bladed screwdriver. Remove the plunger assembly. Unscrew the drain outlet flange from the tee. Unscrew the tailpiece from the tee. Wrap the threads with Teflon tape and replace. Install the flexible white sealing gasket on the flange. Place it in the sink outlet. Install the black mack gasket, white friction ring and retainer nut on the flange. Do not tighten the nut against the bottom of the sink at this time. Thread the tee and tailpiece to the flange. The pivot must face the faucet. Turn the drain assembly if necessary. Tighten the retainer nut. Place the plunger assembly in the drain. Install the horizontal rod so that the end goes through the loop in the bottom of the plunger. Install and hand tighten the pivot ball nut. 12 1 9 2 10 12 7 13 3 11 2 6 5 7 8 3 2 3 19 18 7 15 16 17 14 4 24 7 5 16 13 Replacement Parts 1 Starck handle 10091XX0 2 cold cartridge 9 4008000 3 hot cartridge 9 4009000 4 aerator 9 4010XX0 5 drain pull rod 9 4083XX0 6 spout 9 4014XX0 7 connection hose 9 4071001 8 fixing set 9 4701000 9 Carlton lever, cold 17296XX0 10 Carlton lever, hot 17295XX0 11 aerator -- 17104/17105 13185XX0 other models 13085XX0 12 drain pull rod 9 4028XX0 13 fixing set 9 4138000 14 Terrano lever, cold 37296XX0 15 Terrano lever, hot 37295XX0 16 aerator 9 6336XX0 17 pull rod knob 9 6335XX0 18 fixing set 13961000 19 spout 9 6521XXX 20 Phoenix lever, cold 9 6629XX1 21 Phoenix lever, hot 9 6628XX1 22 pull rod 9 2620XX0 23 Phoenix cross handle 9 6793XX1 24 fixing set 9 6016000 XX = Color code - 00 chrome - 62 oil rub bronze - 82 brushed nickel - 83 polished nickel 22 21 20 3 2 7 24 11 23 6 5 1 2 3 7 8 Replacement parts – Axor Steel 1 aerator cpl. 6683800 2 Steel handle 352 3800 3 color-ring cold/hot water 7127000 4 escutcheon 7128800 5 connection hose 4071001 4 6 cold cartridge 4008000 7 Fixation cpl. 6016000 8 Lift rod 6657800 hot cartridge 400 000 Cleaning Recommendation for Hansgrohe Products Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning. Cleaning Materials for Faucets and Showers Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when ...
Эта инструкция также подходит к моделям:Прочие аксессуары для дома - Allegroh 36135XX1 (2.8 mb)
Прочие аксессуары для дома - Carlton 17135XX1 (2.8 mb)
Прочие аксессуары для дома - Carlton 17235XX1 (2.8 mb)