Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Trim back the foam tape on the front and rear bin rails, as shown. C. Position the adapter panel and hinge on bin and fasten with the two existing screws. D. Using the adapter as a template, drill three 5/32” (4 mm.) holes, .500” (12.7 mm.) deep maximum, in the rear of the bin (adapter must be level with bin). Warning: Do not drill through interior liner. Attach with the screws provided. E. Apply foam tape to the edge of the adapter, as shown. Note: We recommend using RTV at intersections and along front inside edge of foam tape to prevent water tracking. Use double thickness with S-series ice machines. 3. Refer to ice machine installation manual for ice machine installation procedures. Existing two Screws Trim Back Existing Foam Tape 8 11/16” Double Thickness of Tape with S-series Foam Tape from Kit (trim to fit) - Double Thickness of Tape with S-series Screws from Kit Drill three 5/32” dia. Holes (use Adapter as a Template to Locate Holes on Bin) IMPORTANT DO NOT DRILL THROUGH THE INSIDE OF THE BIN LINER - ONLY THROUGH OUTER METAL Manitowoc Ice, Inc. 2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8008913 Web Site - Rev. 05/12/04...