Оценок - 4, средний балл: 3.3
(
)
)
|
Фото и характеристики Samsung SC6530 |
К этому устройству также есть другие инструкции:
Пылесосы - SC6530 (8.67 mb)
Пылесосы - SC6530 (9.19 mb)
Фрагмент инструкции
12. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. 13. Don’t carry the vacuum cleaner by holding the hose. Use the handle on the vacuum cleaner set. EN-1 1ASSEMBLING THE CLEANER Features may vary according to model. Ў For storage, park the floor nozzle. OPTION CAUTION Please do not press the button of dust bin handle when carrying machine. EN-2 2OPERATING THE CLEANER 2-1 ON/OFF SWITCH 1) BODY CONTROL TYPE 2) ON/OFF TYPE 2-2 POWER CORD NOTE When removing the plug from the electrical outlet, grasp the plug, not the cord. 2-3 POWER-CONTROL 1) SILDE CONTROL TYPE ONLY (Optional) • SLIDE TO THE STOP POSITION Vacuum-cleaner switches off (stand by mode) • SLIDE FORWARD TO MAX Suction capacity increases smoothly up to maximum. 2) BODY-CONTROL TYPE / ON/OFF TYPE -HOSE - BODY (BODY-CONTROL TYPE ONLY) To reduce suction for cleaning draperies, MIN = For delicate surface e.g. net curtains. small rugs, and other light fabrics, pull the MAX = For hard floors and heavily soiled carpets. tap air until the hole is open. EN-3 2-4 HOW TO USE AND MAINTAIN THE ACCESSORIES Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. To check for blockages, separate the telescopic pipe and adjust to shorten. This allows for easier removal of waste clogging the tube. PIPE ACCESSORY Push the accessory on to the end of the hose handle. Pull out and turn the dusting brush for cleaning delicate areas. To use the upholstery tool, push the accessory on to the end of the hose handle in the opposite direction. Features may vary according to model. Ў Remove waste matter completely if the Adjust the inlet lever according to the inlet is blocked. floor surface. OPTION ....Carpet Cleaning ....Floor Cleaning OPTION - Detach transparent drum cover for easy cleaning. EN-4 Once dust reaches the dust full mark, or once the dust full light is on, empty the dust bin. Option Take the dust bin out by pressing the button. Separate the dust bin cover. Throw away dust in the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound. 1 2 3 4 5 CLICK 6 3EMPTYING THE DUST BIN NOTE You may rinse the dust bin with cold water - Empty into a plastic bag (recommended for asthma/allergy sufferers) EN-5 4CLEANING THE DUST PACK 4-1.WHEN TO CLEAN THE DUST PACK Suction is significantly weakened during cleaning. Shaking sound of inlet stuck to the floor (soft mats, blankets, etc.) is heard. Turn the vacuum power to 'MAX' If the filter check indicator turns red with the inlet floating 10 cm above flat floor, clean it. When the indicator light comes on, please empty the Dust Pack(4-2) as shown in the following illustrations. - If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. HANDLE CONTROL EN-6 4-2 CLEANING THE DUST PACK 1 2 3 Remove the dust bin and dust Remove the fixed frame Remove the sponge pad from pack as shown. of the dust pack cover. the dust pack . 4 65 Wash the sponge and the filter Let the sponge and dust pack dry Put the sponge into of the dust pack with water. in the shade for more than the dust pack. 12 hours. 7 8 Before reassembly, Put the assembled dust pack align the dust pack cover into the main body. and dust pack correctly. NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. EN-7 EN-8 6CLEANING THE OUTLET FILTER Take out both the dust bin and the dust pack. Press the fixed frame part at the back of the main body to remove. Pull out the HEPA Filter using the tab. Dust the HEPA filter. Put the HEPA filter into the main body until you hear a ‘click’ sound. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. 5CLEANING THE MOTOR PROTECTION FILTER NOTE : Replacement filters are available at your local Samsung distributor. Remove and replace the blocked outlet filter. OPTION - MICRO CARBON FILTER - IF YOU HAVE A PROBLEM PROBLEM CAUSE REMEDY 0 Motor does not start. No power supply. Thermal cut-out. Check cable, plug and socket. Leave to cool. Suction force is gradually decreasing. Nozzle, suction hose or tube is blocked. Check for blockage and remove it. Cord does not rewind fully. Check that the cord is not twisted or wound unevenly. Pull the cord out 2-3m and push the cord rewind button. Vacuum cleaner does not pick up dirt. Crack or hole in hose. Check hose and replace if required. Low or decreasing suction Filter is full of dust. Please check filter and, if necessary, clean as illustrated in the instructions. This Vacuum cleaner is approved the following. EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EEC Low Voltage Directive : 73/23/EEC and 93/68/EEC EN-9 Mode d’emploi ASPIRATEUR . Avant d'utiliser l'appareil, lisez...