Войти:
Оценок - 2, средний балл: 3.5 ( )

Инструкция по эксплуатации Aussie, модель 330

Производитель: Aussie
Размер: 148.75 kb
Название файла: 8d79d7fd-6463-4166-b2e1-2ffc5c9c9fe2.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


This product carries a one year warranty beginning from the date of purchase. A three year warranty is extended to the burner elements of this appliance. These warranties can only be activated by returning the warranty card. OPTIONAL MOUNTING SYSTEMS While your new marine grill does have feet that allow it to be used on a table, several mounting kits are available to help you attach it to your Boat or RV. PART NO 15-150A Universal Rail Mount Kit Use when attaching the BBQ to a round metal rail 7/8th-1.5” in diameter (2.2-3.8cm) or square rail. Vertical, horizontal or angled rail can be used. For rail diameter larger than 1 1/8” 15-150F FISHING ROD HOLDER MOUNT KIT Use in a “rocket launcher” style or flush mount fish rod holder (1 .). Universal angle, quick release. 15-187 TAFF RAIL MOUNT KIT Includes two sockets that are installed in the taff rail, cap rail or gunwale. Included stanchions hold the grill over the side. Standard DECK LEGS DANGER! THIS BBQ IS INTENDED FOR LOW PRESSURE GAS ONLY. DO NOT CONNECT THIS APPLIANCE TO A GAS SUPPLY IN THE ABSENCE OF A LOW PRESSURE REGULATOR (11” W/C, 0.5PSI, 27.4 mBar. THE SPITFIRE IS DESIGNED FOR LPG/LPG MIX ONLY IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate, or service this barbeque. Improper use of this gas appliance can cause serious injury or death from burns, fire, explosion, carbon monoxide poisoning and oxygen depletion. WARNING: DO NOT install this appliance in spaces containing internal combustion engines, their fuel tanks, or joints and fittings of their fuel systems. TEST ALL PROPANE LINES AND CONNECTIONS FOR LEAKS WITH A SOAPY WATER SOLUTION. DO NOT FLAME TEST FOR LEAKS. WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury, or loss of life. — Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance. — WHAT TO DO IF YOU SMELL GAS • Do not try to light any appliance. • Do not touch any electrical switch.. • Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire department. CLOSE THE LPG CYLINDER VALVE WHEN BBQ IS NOT IN USE CLOSE THE LPG CYLINDER VALVE IN THE EVENT OF AN EMERGENCY CLOSE THE BBQ REGULATOR VALVES OPENING THE LPG CYLINDER VALVE IMPORTANT: Save this manual for future reference. THINGS TO KNOW Your Thermometer: The Spitfire 180 and the 330 are fitted out with a thermometer. Inspect the thermometer to ensure no small white bits of plastic are around the edge, left over from the protective plastic used in the manufacturing process. Be aware that bending or damaging the thermometer probe or dropping the Spitfire, may cause the thermometer to stop working. Your Igniter: Your igniter has been installed for you. Two igniter lead wires connect the igniter to the burners. Care to be taken to ensure these leads are not damaged. Should one of your igniters stop working, remove the lead wires and clean all of the connections as a first step to repair. The Burners : Your Spitfire 330 Grill has two burners, each controlled by an independent gas valve. The burner is made up of the following components: the burner cup; flame spreader; the orifice and the burner cap plate. Screwed in to the top of the burner is the primary heat distribution plate and is not considered a burner component for warranty purposes. The burner components can be disassembled for cleaning and maintenance purposes but care must be taken to ensure the parts are not damaged during cleaning or disassembly. Use a precision screwdriver to carefully remove the stainless machine screws that hold down the burner cap plate. Remove the screws and the flame spreader to access the burner cup. The orifice component is the series of brass fitting in the bottom of the burner cup. The orifice jet on the end can be removed and cleaned. If your Spitfire becomes much less hot, a blocked orifice assembly could be the reason. Small pieces of rubber hose from the gas supply or dirt in the propane can clog an orifice. When cleaning an orifice, do not enlarge the holes. The Gas Valves : Each burner is controlled by a gas valve. Do not detach or open the gas valves on your appliance as this will damage the components. There should be no reason to remove or service these parts. PROPANE FUEL SUPPLY • Propane Bottle: As shipped, the Spitfiure 330 is not set up to take high pressure propane from a disposable bottle but with the correct regulator and fittings you will be able to use the disposable bottles. (Part 15-197 for the regulator kit) • Propane Tank (Low Pressure): Your Spitfire 330 BBQ is designed to be connected directly to your existing low pressure propane system. If your system includes an 11” W/C regulator (0.5psi / 27.3 mBar) you can attach it directly to your 330 Grill. The fitting on the grill is a standard 45 d...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории