Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
• Leave this manual with party responsible for use and operation. • Read, understand and follow these instructions for safe installation and operation. DO NOTDISCARD Tested and Listed by Beaverton Oregon USA OMNI-Test Laboratories, Inc. C US OWNER’S MANUAL Installation and Operation Model: 830-0381 3100-I ACT WOOD INSERT Advanced Combustion Technology (ACT) DO NOT DISCARD THIS MANUAL CAUTION • Important operating and maintenance instructions included. • Leave this manual with party responsible for use and operation. • Read, understand and follow these instructions for safe installation and operation. DO NOTDISCARD Tested and Listed by Beaverton Oregon USA OMNI-Test Laboratories, Inc. C US OWNER’S MANUAL Installation and Operation Model: 830-0381 3100-I ACT WOOD INSERT Advanced Combustion Technology (ACT) WARNING • Do not store or use gasoline or otherflammable vapors and liquids in the vicinity of this or any other appliance. • Do not overfire - If heater or chimney connector glows, you are overfiring. Overfiring will void your warranty. • Comply with all minimum clearances to combustibles as specified. Failure to comply may cause house fire. If the information in these instructions is not followed exactly, a fire may result causing property damage, personal injury, or death. WARNING HOT SURFACES! Glass and other surfaces are hot during operation AND cool down. Hot glass will cause burns. • Do not touch glass until it is cooled • NEVER allow children to touch glass • Keep children away • CAREFULLY SUPERVISE children in the same room as appliance • Alert children and adults to hazards of high temperatures High temperatures may ignite clothing or other flammable materials. • Keep clothing, furniture, draperies and other combustibles away. Fire Risk. WARNING For use with solid wood fuel only. Other fuels may overfire and generate poisonous gases (i.e. carbon monoxide). Installation and service of this appliance should be performed by qualified personnel. Hearth & Home Technologies recommends NFI certified professionals, or technicians supervised by an NFI certified professional. 250-6381D September 1, 2008 R R 3100-I ACT WOOD INSERT and Welcome to the Quadra-Fire Family! Hearth & Home Technologies welcomes you to our tradition of we are old-fashioned when it comes to craftsmanship. Each unit excellence! In choosing a Quadra-Fire appliance, you have our is meticulously fabricated and surfaces are hand-finished for last- assurance of commitment to quality, durability, and performance. ing beauty and enjoyment. Our pledge to quality is completed as each model undergoes a quality control inspection. We wish you This commitment begins with our research of the market, includ and your family many years of enjoyment in the warmth and com ing ‘Voice of the Customer’ contacts, ensuring we make products fort of your hearth appliance. Thank you for choosing Quadra that will satisfy your needs. Our Research and Development facility Fire. then employs the world’s most advanced technology to achieve the optimum operation of our stoves, inserts and fireplaces. And yet SAMPLE OF SERIAL NUMBER / SAFETY LABEL LOCATION: On right side of insert as face the appliance Serial No / Numero De SerieOMNI-Test Laboratories, Inc. Report #061-S-34-2 O T LTested and Listed by Beaverton Oregon USA C U.S. ENVIRONMENTAL PROTECTION AGENCY - Certified to comply with July 1990 particulate emission standards. 2005 2006 2007 Jan Feb Mar Apr May June July Aug Sept Oct. Nov. Dec. LISTED ROOM HEATER, SOLID FUEL TYPE. "For Use with Solid Wood Fuel Only." Also for use in Mobile Home. 250-6392 R CAUTION: Install and use only in accordance with manufacturer's installation, venting and operating instructions. CONTACT YOUR LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION IN YOUR AREA Refer to manufacturer's instructions and local codes for precautionsrequired for passing chimney through a combustible wall or ceiling. When used as a masonry insert stove, install only in a masonryfireplace built to UBC Chapter 37. Do not remove brick or mortar toaccommodate insert. Installation requires minimum of a starter pipe into existing chimney with airtight face seal. Install only on a non-combustible hearth. Approved for installation anduse in factory built zero-clearance fireplaces conforming to minimumfire chamber specifications (USA only). PREVENT HOUSE FIRES HOT WHILE IN OPERATION DO NOT TOUCH, KEEP CHILDREN AND CLOTHING AWAY. CONTACT MAY CAUSE SKIN BURNS. KEEP FURNISHINGS AND OTHER COMBUSTIBLE MATERIAL FAR AWAY FROM THE APPLIANCE. SEE NAMEPLATE AND INSTRUCTIONS. 1445 N. Highway, Colville, WA 99114 Model / Modele: 3100-I ACT INSERT Made in U.S.A. / Fait Aux Etats-Unis ATTENTION: DO NOT REMOVE THIS LABEL / NE PAS ENLEVER L'ETIQUETTE Manufactured by / Fabrique par: Tested to / Teste a: UL 1482, ULC S628 APPAREIL DE CHAUFFAGE DE PIECE, DE TYPE DE COMBUSTIBLE SOLIDE, "Pour Usage Avec Bois Solide Seulement" PREVENTION DE...
Эта инструкция также подходит к моделям:Камины - 830-0381 (1.65 mb)