|
Фрагмент инструкции
Read all instructions 2. To protect against electrical motor in water or other liquid. 3. Close supervision is necessary when any appliance is used near children. 4. Unplug from outlet when not in use off parts, and before cleaning. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged the appliance malfunctions, or has been dropped manner. See warranty to return for examination, repair, or electrical or mechanical adjustment. 7. The use of accessory attachments (not recommended or sold by Rival ® ) may cause fire, electric shock or injury. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch heated surfaces, including the stove. 10. Do not use appliance for other than intended use. 11. Do not operate your Ice Cream Maker dry. Always have ice cream mixture in the ICE CREAM CAN when you plug in your appliance. 12. The ICE CREAM CAN should be thoroughly towel dried after use and washing. If the ICE CREAM CAN is left to “air dry”, water spots may appear. -2 This appliance HOUSEHOLD No user-serviceable parts inside. Power Unit this product. POLARIZED PLUG in the outlet, reverse the plug. If it still qualified electrician. Do not attempt to defeat This appliance has a polarized than the other). As a safety feature, apolarized outlet only one way. If the plug does not fit fully -3 KNOW YOUR WOOD BUCKET: 8455-X (4 quart), PLASTIC BUCKET: 8401 (4 quart), 8405 (4 quart tall), • Motor Drive motor drive Top mounted. Engages stem • Cork Used to plug hole in COVER when cork cover hardening and ripening ice cream. • Cover dasher Tab in COVER fits notch in ice cream can. • Dasher Stem on top fits through hole in center of ice cream can COVER, and engages MOTOR DRIVE. • Ice Cream Can tab plates Container holds ice cream mixture. latch • Drain Hole Allows salt water to flow freely out of drain hole BUCKET. • Bucket bucket Latch and tab plates secure MOTOR DRIVE. Drain hole located near top of BUCKET. Holds rock salt and ice. HOW TO USE YOUR ICE CREAM MAKER NOTE: Before using for the first time, wash all parts except MOTOR DRIVE (see “HOW TO CLEAN YOUR ICE CREAM MAKER”). 1. Pour chilled ice cream mixture into cooled ICE CREAM CAN. Fill ICE CREAM CAN only 3/ 4 full, as mixture will expand during freezing. 2. Insert DASHER. Be sure that bottom of DASHER fits indentation at bottom of ICE CREAM CAN. 3. Place COVER on ICE CREAM CAN. -4 For best results use ® Rock Salt MAKER SIZE 4 Quart 5 Quart 6 Quart ROCK SALT for making ice cream 3 Cups 31. 2 Cups 4 Cups ROCK SALT for hardening ice cream 2 Cups 21. 2 Cups 3 Cups CRUSHED ICE for making and hardening ice cream 17 lbs. 22 lbs. 25 lbs. 4. Place filled ICE CREAM CAN in Make sure ICE CREAM CAN is centered and engages with bottom 5. Place MOTOR DRIVE over ICE CREAM engages hole in bottom of MOTOR DRIVE. slightly until MOTOR DRIVE engages ICE two tabs at the end of MOTOR DRIVE into rounded tab (at other end of MOTOR DRIVE) latch lock over rounded tab. Plug power cord into 6. While ice cream maker is running, distribute 2 inches bottom of BUCKET. Sprinkle approximately 1/ 4 cup salt uniformly over layer of ice. Exception: For Models 8455-X and 8550-X, layer 1 inch of ice with 1/ 2 cup salt. (See “Hints”) NOTE: The DASHER does not move, the ICE CREAM CAN turns around it. 7. Continue adding layers of ice, with salt between layers, until ice level reaches top of rotating ICE CREAM CAN. NOTE: Should ice cream maker stop before churning is complete (approximately 20-40 minutes), check to see if large ice cubes are jammed against the rotating ice cream can. (See “Important Points”) 8. Ice cream should churn about ...
Эта инструкция также подходит к моделям:Прочая кухонная техника - 8420 (48.12 kb)
Прочая кухонная техника - 8455-X (48.12 kb)
Прочая кухонная техника - 8550-X (48.12 kb)
Прочая кухонная техника - 8605 (48.12 kb)