Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Incorrect operation may result in unexpected accidents (fire, shock, or injury). . After having read this Manual, keep it in a safe, readily-accessible place for future reference. . Some of the descriptions contained in this manual may not be relevant to some printer models. In order to prevent injury hazard to operators, third parties or damage to property, special warning symbols are used in this user’s manual to indicate important items to be strictly observed. . The following describes the degree of hazard and damage that could occur if the printer is improperly operated by ignoring the instructions indicated by the warning symbols. WARNING Neglecting precautions indicated by this symbol may result in fatal or serious injury. CAUTION Neglecting precautions indicated by this symbol may result in injury or damage to properties. This symbol is used to alert your attention to important items. This symbol is used to indicate prohibited actions. This symbol is used to alert you to the danger of electric shock or electrostatic damage. This symbol denotes a request to unplug the printer from the wall outlet. — 4 — Caution Labels ENGLISHWARNING • Do not attempt to insert any plug (e.g. modular plug) other than the specified drawer kick-out connector plug into the drawer kick-out connector as it may damage the telephone connection or the printer. CAUTION • The thermal head remains at a dangerously high temperature immediately after use. Do not touch the head until it cools off. WARNING Do not use or store this product in a place where it will be exposed to: • Flames or moist air • Direct sunlight • Hot airflow or radiation from a heating device • Ill-ventilated atmosphere • Chemical reactions in a laboratory • Airborne oil, steel particles, or dust • Salty air or corrosive gases • Static electricity or strong magnetic fields . Neglecting these warnings may result in printer failure, overheating, emission of smoke, fire, or electric shock. Do not drop any foreign object nor spill liquid into the printer. Do not place any object on the printer either. • Do not drop any metallic object such as a paper clip, pin or screw into the printer. • Do not place a flower base, pot or cup containing water on the printer. • Do not spill coffee, soft drinks or any other liquid into the printer. • Do not spray insecticide or any other chemical liquid over the printer. . A metallic foreign object, if accidentally dropped into the printer, may cause printer failure, fire, or electric shock. Should it occur, immediately turn the printer off, unplug it from the supply outlet, and call your local CITIZEN SYSTEMS dealer. — 5 — ENGLISH Please observe the following precautions for power source and power cord: • Do not plug or unplug the power cord with a wet hand. • Use the printer only at the specified supply voltage and frequency. • Use only the specified AC adapter with the printer. • Check to make sure that the supply outlet from which the printer is powered has a sufficient capacity. • Do not plug the power cord into a supply outlet with dust or debris left on its plug. • Do not supply the printer from a power strip or current tap shared with other appliances. • Do not use a deformed or damaged power cord. . Neglecting to handle properly may result in printer failure, emission of smoke, fire, or electric shock. . An overload may cause the power cable to overheat or the circuit breaker to trip. • Do not allow anything to rest on the power cord. Do not place the printer where the power cord will be trampled on. • Do not attempt to modify the power cord unnecessarily. • Do not use or carry the printer with its power cord bent, twisted, or pulled. • Do not lay the power cord in the neighbor of a heating device. . Neglecting these cautions may cause wires or insulation to break, which could result in leakage, electric shock, or printer failure. If a power cord sustains damage contact your CITIZEN SYSTEMS dealer. • Supply power to the printer from a convenient wall outlet, readily accessible in an emergency. • Do not leave things around the supply outlet to always ensure easy access to it. . The printer may not be immediately shut down in an emergency. • Insert the power plug fully into the outlet. • If the printer is not to be used for a long time period, leave it disconnected from its supply outlet. Do not handle the printer in the following ways: • Do not allow the printer to sustain strong impacts or hard jolts (e.g. trampling, dropping, striking with a hard edge). • Never attempt to disassemble or modify the printer. • Do not clean the printer with any organic solvent, such as alcohol, paint thinner, trichloroethylene, benzene, or keton. . Neglecting to handle properly may result in printer failure, overheating, emission of smoke, fire, or electric shock. BenzineThinner Install, use, or store the printer out of the reach of children. . The plastic bag the printer came in must be disposed of properly or kept away from children. Wearin...