Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Preparation Point the printer’s infrared port to the camera’s infrared port face to face. Controllable area is about 10 - 30 cm (4 12 inches) in terms of straight line distance and an angle of 15 degrees right or left. NotesE • Position the infrared ports of both equipment within the controllable area. Do not place them outside the area nor place them too close, which may interrupt transferring or results in noises. • Do not cover the infrared port with your hand or any other objects. • Infrared rays cannot pass through a wall, opaque glass, etc. If they pass through glass, etc., the controllable distance becomes short. Infrared port • Keep other infrared devices such as infrared cordless headphones away during printing. • Very bright lighting may cause malfunction. • Use the camera on the AC power adapter. Within 10 - 30 cm (4 - 12 inches) Printing As you must operate the camera to print, refer to the camera’s manual for the procedure. When the printer receives the first data from the camera, it sounds a short beep. When the printer receives all data successfully, it sounds a long beep and starts printing. Printing takes about 70 seconds per sheet. NotesE • Do not move the printer and the camera during printing. • You may move the printer and the camera after you hear a long beep, except when making several prints. • The printer will sound intermittent beeps when it cannot receive data properly. If this happens, reposition the camera and the printer as described above. • To use other functions of the printer, open and read ”Readme” file in the supplied CD-ROM. The file contains up-to-date information on the printer. Printing 7 (GB) For Your Information For Your Information Precautions On safety • Operate the printer on 220 – 240 V AC, 50/60 Hz only. • Be careful not to put or drop any heavy objects on the power cord, or to damage the cord in any way. Never operate this printer with a damaged power cord. • Should any solid object or liquid fall into the cabinet, unplug the printer and have it checked by qualified personnel before operating it any further. • To disconnect the cord, pull it out by the plug. Never pull the cord itself. • When the printer is not going to be used for an extended period of time, disconnect the power cord from the wall outlet. • Never disassemble the printer. • Do not handle the printer roughly. • To reduce the risk of electrical shock, always unplug the printer from electrical outlet before cleaning and servicing the printer. On installation • Avoid placing the printer in a location subject to: – vibration – high humidity – excessive dust – direct sunlight – extremely high or low temperatures • Do not use electronic equipment near the printer. The printer will not work properly in electromagnetic fields. • The printer is designed to operate horizontally. Never attempt to incline the printer. • Do not place heavy objects on the printer. • Leave enough room around the printer so that the ventilation holes are not blocked. Blocking these holes may cause internal heat build-up. • Do not cover the printer with cloth or other materials. On moisture condensation If the printer is brought directly from a cold location to warm location or placed in an extremely warm or humid room, moisture may condense inside the unit. In such cases the printer will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, turn off the power and do not use the printer for at least one hour. On cleaning Clean the cabinet, panel and controls with a soft dry cloth, or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the finish. On the print cartridge and print paper Notes on storing the print cartridge • Avoid placing the cartridge in a location subject to: – high temperatures – high humidity – excessive dust – direct sunlight • When you are going to store a partially-used cartridge for an extended period of time, store it in its original bag. Notes on storing the print paper • Avoid placing the print paper in a location subject to: – high temperatures – high humidity – excessive dust – direct sunlight • When you are going to store the partially-used print paper for an extended period of time, store it in its original bag. For Your Information 8 (GB) Troubleshooting If you run into any problems using the printer, use the following check list. Should any problem persist after you have made the checks below, consult your nearest Sony dealer or Sony service facility. Refer to the software manual as well. The power is not turned on. bConnect the AC power cord to an AC outlet securely. Cannot remove the print cartridge. bTurn off and on the printer. After the motor sound stops, try to remove the cartridge. Printing takes longer than usual. bIf the printing indicator is flashing, see “If the indicators are on.” Cannot print. bConnect the printer to the computer prope...