Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
By connecting the DPP-M55 to your PC or Macintosh, you can edit images and make prints. Direct printing of the image recorded by the Sony Digital Still Camera mpage 7 You don’t have to connect the printer to the camera. The image data is transmitted from the DSC-F1 to the DPPM55 via infrared data communication system. The image data can then be transmitted from the DPPM55 to the connected PC or Macintosh computer. Exclusive software to edit images The DPP-M55 is supplied with a CD-ROM in which you will find the printer driver and the Printer Utility software. You can use the DPP-M55 to print images processed not only on the supplied Printer Utility but also on an image processing software such as Adobe Photoshop. Various printouts from the Printer Utility You can edit images and make printouts from the Printer Utility. For details, see the ”User’s Guide” either for Windows 95 or for Macintosh depending on your computer. • Calendar • Cropping • Greeting card • 1/16-size stickers Getting Started 5 Loading the print cartridge Insert the print cartridge with the VP mark into the printer. Use only the video print cartridge supplied with the video print paper packed in the same carton. 1 While pressing down the lever, open the cartridge compartment lid. 2 Wind up the ink ribbon to remove the slack. 3 Insert the print cartridge firmly until it clicks into place and close the cartridge compartment lid. 2 1 If the cartridge compartment lid does not close Remove the print cartridge, and then reinsert it. MCaution Never put your hand into the cartridge compartment. The thermal head reaches high temperatures, especially after repeated printing. Notes · When you put the print cartridge, stand it as illustrated so that dust will not get on the ink ribbon. · Do not touch the ink ribbon or place the print cartridge in a dusty location. Fingerprints or dust on the ink ribbon may result in imperfect printing. To remove the used print cartridge Open the cartridge compartment lid and push up the eject lever. To load the half-used print cartridge If ink ribbon should tear Repair the ribbon with transparent tape. There should be no problem with using the remaining portion of the ribbon. Before loading the print cartridge into the printer, turn the reel until the transparent tape hides. Remove any slack (1). Then, while pressing the center of the reel, wind the ink ribbon until the black bar appears on the left (2). 2 1 Remove any slack (1). Then, while pressing the center of the reel, wind the ink ribbon until the black bar appears on the left (2). m Repair with transparent tape. Getting Started Inserting the print paper You can use the print paper with the VP mark. Insert the print paper only one sheet at a time. 1EConnect the supplied power cord, and turn on the power. Power switchPower cord (supplied) to the wall outlet 2ESend the print command from the computer or Sony digital still camera. First the data transmission indicator starts flashing and then the print paper indicator starts flashing. 3EInsert a sheet of print paper into the paper inlet until less than 13/16 inches (2 cm) of the print paper is left out of the paper inlet. The print paper automatically loaded into the printer. NotesE • Do not touch the printing surface (the side where nothing is printed). • Do not place the print paper in a dusty location. Fingerprints or dust on the printing surface may result in imperfect printing. • Use the print paper recommended for this printer only. If you use a different type of paper, it may cause problems and the printer may not print properly. • To prevent paper from jamming, do not insert another sheet of print paper before you take out the printout. • Do not hand-write or type an address or other characters or drawings in the reverse side of the print paper before printing. This may cause paper jamming, or failure in printing. • You cannot type on the printing surface; use an oil pen to write greetings or other characters or drawings on the printing surface. Less than 13/16 inches (2 cm) Getting Started Printing Printing Printing an image recorded by Sony Digital Still Camera DSC-F1 You can directly print the image recorded by the Sony Digital Still Camera DSC-F1. Preparation Point the printer’s infrared port to the camera’s infrared port face to face. Controllable area is about 4 - 12 inches (10 - 30 cm) in terms of straight line distance and an angle of 15 degrees right or left. NotesE • Position the infrared ports of both equipment within the controllable area. Do not place them outside the area nor place them too close, which may interrupt transferring or results in noises. • Do not cover the infrared port with your hand or any other objects. • Infrared rays cannot pass through a wall, opaque glass, etc. If they pass through glass, etc., the controllable distance becomes short. Infrared port Within 4 - 12 inches (10 - 30 cm) • Keep other infrared devices such as infrared cordless headphones away during printing. • V...