Open the CD-ROM icon, then double-click [setup (setup.exe)]. 8 Follow the on-screen instructions. 9 Click [Finish]. IMPORTANT • Proceed to step below to assemble the machine. Please keep your computer powered on. Remove the shipping material from the machine. 1 Place the machine on a flat surface. 2 Remove all shipping tapes from the exterior of the machine. 3 Open the document cover Aand remove the protective sheet B. 4 Open the feeder cover Cand remove the shipping material Das shown below. Assemble the machine. 3 Attach the document tray, then lower it. 2 Attach the paper output tray listen for audible click. 1 Attach the multi-purpose tray. D A C B Connect the telephone line and any necessary external device, and set the receive mode. NOTE • Before using your machine, you need to make sure it is set for your telephone line type. For details, see p. 6-4 of the User’s Guide. • Refer to the receive mode instructions after the unit is powered on. Connect the power cord. IMPORTANT • Before turning on the power, make sure the document cover Ais closed. 03 04 07 08 ON/OFF(1sec.) 1 Plug the power cord into a socket. 2 When you connect the machine, the Alarm light blinks, and the messages above should appear in the LCD. 3 If nothing appears in the LCD, press [ON/OFF (1 sec.)] to turn on the machine. •If you need to turn off the machine, press [ON/OFF (1 sec.)] for one second. PLEASE WAIT PUT IN CARTRIDGE Approx. 30 seconds A You can connect an external device (telephone or answering machine) if necessary. Connect the telephone line cord to the wall jack. Turnover tocontinueTurn over to continue ..Telephone or answering machine ..Telephone and answering machine ..Built-in computer modem and telephone Connect external devices as follows: Telephoneline Machine Telephone line Machine Telephone or answering machine Telephone line Machine Computer = Telephone line jack = External device jack Answeringmachine LINE TEL Telephone TelephoneTELLINE Set the receive mode as follows: 1 On the operation panel, press [Fax], [Menu], then [Set]. Ex: 2 Use [2] or [3] to select the receive mode: •Select: – to receive both faxes and voice calls (a telephone must be connected to the machine). – to receive faxes only. – if you have subscribed to a DRP (Distinctive Ring Pattern) service offered by some companies. (For details, refer to the Quick Reference Guide.) – to answer all voice and fax calls manually (a telephone must be connected to the machine). – to receive faxes automatically and route voice calls to an answering machine connected to your machine. For more details on the different receive modes, refer to p. 9-1 of the User’s Guide. RECEIVE MODE FAX/TEL AUTO SW 03 04 07 08 ON/OFF(1sec.) 1 Plug the power cord into a socket. 2 When you connect the machine, the Alarm light blinks, and the messages above should appear in the LCD. 3 If nothing appears in the LCD, press [ON/OFF (1 sec.)] to turn on the machine. •If you need to turn off the machine, press [ON/OFF (1 sec.)] for one second. PLEASE WAIT PUT IN CARTRIDGE Approx. 30 seconds A You can connect an external device (telephone or answering machine) if necessary. Connect the telephone line cord to the wall jack. Turnover tocontinueTurn over to continue ..Telephone or answering machine ..Telephone and answering machine ..Built-in computer modem and telephone Connect external devices as follows: Telephoneline Machine Telephone line Machine Telephone or answering machine Telephone line Machine Computer = Telephone line jack = External device jack Answeringmachine LINE TEL Telephone TelephoneTELLINE Set the receive mode as follows: 1 On the operation panel, press [Fax], [Menu], then [Set]. Ex: 2 Use [2] or [3] to select the receive mode: •Select: – to receive both faxes and voice calls (a telephone must be connected to the machine). – to receive faxes only. – if you have subscribed to a DRP (Distinctive Ring Pattern) service offered by some companies. (For details, refer to the Quick Reference Guide.) – to answer all voice and fax calls manually (a telephone must be connected to the machine). – to receive faxes automatically and route voice calls to an answering machine connected to your machine. For more details on the different receive modes, refer to p. 9-1 of the User’s Guide. RECEIVE MODE FAX/TEL AUTO SW Load paper. Place a stack of paper (print-side up) in the multi-purpose tray q. Pinch the paper guide Aand adjust to the width of the stack w. Then place the tray cover Dover the multi-purpose tray e. NOTE • You may have to move over the document cover cable Eto place the tray cover on the multi-purpose tray. •Make sure the stack does not exceed the paper limit mark Bor tab C. Otherwise a paper jam may occur. Install the printhead. 1 Press [Open] qand lift up the scanning unit w. IMPORTANT • Do not touch the metal rod or any parts insi...
)
