The number of required sheets differs depending on the setting in Layout. For example, if eight copies in Copies and four patterns in one sheet in Layout are specified, two sheets are needed to print. 1 Set Single Frame mode. See "Printing Photographs One at a Time (Single Frame Printing)" on page 39. 2 Move the (cursor) to Copies by press the (top) and (bottom) buttons. Up to 99 copies can be set. 3 Set the number of copies by press the (left) and (right) buttons. n Setting the Media Type (Media Type) You can select the paper for printing from the following seven types: Operation panel display Media name and size [A] Photo Paper Pro for Borderless printing (PR-101) [B] Glossy Photo Cards (FM-101) [C] Photo Paper Pro (PC-101S) [D] Photo Paper Pro Letter size (PR-101) [E] Photo Paper Pro A4 size (PR-101) [F] Plain Paper Letter [G] Plain Paper A4 1 Set the print mode. See "Printing Photographs" on page 35. 2 Move the (cursor) to Media Type by pressing the (top) and (bottom) buttons. 3 Select the media type by pressing the (left) and (right) buttons. You can check the media name that corresponds to each letter on the right side of the operation panel. n Setting the Print Layout (Layout) You can set the number of photographs (layout) to be printed on one sheet of paper. a Notes • In Index mode, Layout cannot be set. • In Single Frame mode, the same photograph is lined up in the specified layout and printed. • In All Frames, Specified Frame, and DPOF mode, the sections that have no photograph to print are left blank. 1 Set the print mode. See "Printing Photographs" on page 35. 2 Move the (cursor) to Layout by pressing the (top) and (bottom) buttons. 3 Select the layout by pressing the (left) and (right) buttons. Select to print a borderless photograph. Select to print a bordered photograph. ¦ Setting the Print Quality (Quality) You can set the print quality. a Note The print quality that can be set differs according to the media type and the print mode. 1 Set the print mode. See "Printing Photographs" on page 35. 2 Move the (cursor) to Quality by pressing the (top) and (bottom) buttons. 3 Select the quality by pressing the (left) and (right) buttons. When the number of is high, the photographs can be printed finely. When the number of is low, the photographs can be printed quickly. ¦ Printing the Date When the Photograph Was Taken (Date Printing) The date when the photograph was taken, as recorded in the digital camera, is printed. Date Date Index printing Printing of full screen without frame a Note In DPOF mode, set Print Date from the digital camera. 1 Set the print mode. See "Printing Photographs" on page 35. 2 Move the (cursor) to Print Date by pressing the (top) and (bottom) buttons. 3 Select OFF (disable)/ON (enable) for date printing by pressing the (left) or (right) button. n Correcting Photographs (Image Correction) This function automatically corrects photographs before printing them. This function is effective when printing photographs that fogged because of fluorescent lighting effects or photographs that do not have proper exposure. a Notes • When image correction is performed, printing may take a long time. • The actual image and coloring may differ from the printed ones depending on the photograph. 1 Set the print mode. See "Printing Photographs" on page 35. 2 Move the (cursor) to Optimize Image by pressing the (top) and (bottom) buttons. 3 Select OFF (disable)/ON (enable) for image correction by pressing the (left) of (right) buttons. a Note To set more detailed photograph correction, two correction functions, a correction for colour fogginess and exposure (Photo Optimizer PRO function) and a correction for reproducing vivid colors (Vivid Photo function), are performed. To set only one correction function, follow the procedure below. 1 Select ON (enable) for Optimize Image by pressing the (left) or (right) button. To use only the correction function for colour fogginess and exposure (Photo Optimizer PRO function) 2 Press the (right) button once. The display changes to [POP[ON]], and only the Photo Optimizer PRO function becomes enabled. To use only the correction function for reproducing vivid colours (VIVID Photo function) 2 Press the (right) button twice. The display changes to [VP[ON]], and only the VIVID Photo function becomes enabled. nn 4 n If Photographs Cannot Be Printed Clearly (Operation Panel Section) If ink is still remaining but printing is blurred or a certain colour does not come out, nozzles in the print head may be clogged or the print head may be out of position. Use the Maintenance function to maintain the print quality. n Maintenance Operation Flow a Notes Before Performing the Maintenance Operation • Open the front cover, and check that the ink tanks are properly set by pressing the PUSH section of the ink tanks. See "Installing the Ink Tanks" on page 7. • Check the remaining amount of ink. If ink has run out, replace the ink tanks. If ink is not p...
)
