Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Click Yes if you are prompted to restart your computer To insure highest quality output, continue with Step 7 Align the Printhead. Turn on your Mac and insert the “S820D Setup Software & User's Guide” CD-ROM. NOTE: Screen shots may differ depending on the operating system used. Open the Printer Driver folder on the CD-ROM, then double-click the Installer icon. Read the License Agreement and click Accept, if you agree. Click Install. The printer driver will load automatically. If the message “No other applications can be running…” displays, click Continue. When the “Installation was successful” screen displays, Restart your computer. NOTE: Register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. After the computer restarts, TURN THE PRINTER ON. Select the Apple menu, then Chooser. Click the S820D icon in the Chooser. The printer name will highlight and move to the right panel. NOTE: To use the BJ Print Monitor, click the Backgrounding button to the On position. Close the Chooser. Access your “S820D Setup Software & User’s Guide” CD-ROM again. From the Application folder, double-click on the software to be installed. Follow the on-screen instructions. When the “Installation has Finished” screen appears, click OK. NOTE: For more information, refer to the “S820D Quick start Guide” or view the electronic documentation on the CD-ROM. When prompted, restart your computer. To insure highest quality output, continue with Step 7 Align the Printhead. 1 2 3 4 6 7 8 5 9 10 11 11 12 13 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 Install the Printer Driver (Macintosh®)6 Align the Printhead7MacintoshWindows Install the Printer Driver (Windows®)6 POWERLampPOWERButtonPart no. QA7-1967 © 2001 Canon U.S.A., Inc. Canon and BCI are trademarks of Canon Inc. CompactFlash is a trademark of SanDisk Corporation. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. Printed in Thailand Add a stack of blank paper to the sheet feeder. Start the alignment procedure. Windows: a. Click Start, then Settings, then Printers. NOTE: For Windows XP, select Start, then Control Panel. Then click on Printers and Other Hardware, then Printers and Faxes. b. Right-click the Canon S820D icon, then click Properties. c. Click the Maintenance tab, then click the Print Head Alignment icon. Macintosh: a. From the File menu in a software application, click Page Setup. b. Click the Utilities button. c. Click the down-arrow to select Test Print. d. Click the Print Head Alignment icon. Click Yes (Windows) or OK (Macintosh) when prompted if the pattern printed successfully. Compare the different patterns for each color on the printout: For each color on the test printout, enter the number in the Print Head Alignment window that corresponds with the smoothest looking test pattern. Click OK (Windows) or Send (Macintosh) when finished. Before using the printer, align the printhead to ensure the best quality printing. Be sure to TURN THE PRINTER OFF before continuing. NOTE: For Windows® XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing. IMPORTANT: If you see the Add New Hardware Wizard, click Cancel. Close any open software applications, then insert the “S820D Setup Software & User's Guide” CD-ROM. The setup program should run automatically. NOTE: If the setup program does not run, click Start, then Run, then type D:\msetup.exe, where D is your CD-ROM drive. Read the License Agreement, then click Yes, if you agree. When the main menu appears, make sure that the Printer Driver is highlighted, then click Install. NOTE: If you are prompted to restart Windows, remove the CD-ROM, then click OK. After the computer restarts, insert the CD-ROM and continue. When the Printer Port window appears, TURN THE PRINTER ON so the printer port (connection) can be automatically detected. The software will begin identifying the printer port being used. IMPORTANT: If your computer cannot detect a printer port, refer to the Troubleshooting chapter in the “S820D Quick Start Guide” for instructions. When the Terminate Installation window appears, click OK. Follow the on-screen instructions to continue with Product Registration. NOTE: Remember to register your product to ensure product support. The serial number is located on the inside of the printer, to the right of the printhead. When the main menu appears, make sure that Application is highlighted, then click Install. When the Terminate Installation window appears, click OK, then Exit. NOTE: For more information. refer to the “S820D Quick Start Guide” or view the electronic documentation on the CD-ROM. Click Yes if you are prompted to restart your computer To insure highest quality output, continue with Step 7 Align the Printhead. Turn on your Mac and insert the “S820D Setup Software & User's Guide” CD-ROM. NOTE: Screen shots...