Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Continue with Step 6 on side two. USB Port USB Cable Protective cap Insert the black ink tank (BCI-24 Black) into the slot on the right. Press down until the ink tank locks into place Repeat the procedure for the color ink tank (BCI-24 Color), inserting it into the remaining slot. Close the front cover. Pull out the paper rest and the output tray (i350 only). Remove the black ink tank (BCI-24 Black) from its package and pull off the orange protective cap. NOTE: To avoid spilling ink, do not touch the bottom of the tank once you have removed the protective cap. Click Remove the print head from its package. Raise the gray lock lever on the printer. Slide the print head into the holder until it is securely seated. Lower the lever until it locks into place. Tear at notch to open Electrical contacts NOTE: Do not touch the electrical contacts on the back and bottom of the print head. Remove the orange protective cap. Open the front cover. Remove the packing material from the print head holder. Remove all shipping tape from the printer. NOTE: The serial number is located to the to register the product. Shipping Tape Serial number Print head holder Packing material Carefully remove all items from the box. 50 Series Color Bubble Jet Printer Documentation and Software Kit Power Cord i350/i250 Series Print Head Ink Tanks BCI-24 Color NOTE: These instructions are for both the i350 Series Color Bubble Jet and the i250 Series Color Bubble Jet printers. Some of the graphics used may vary slightly from the product you have purchased. NOTE: USB cable not included. 1 Unpack the Printer 2 Prepare the Printer 3 Install the Print Head 4 Install the Ink Tanks 5 Connect the Printer To Your Computer QA7-2709-V01 ©2003 Canon U.S.A. Inc. Canon is a registered trademark of Canon Inc. All other products and brand names are registered trademarks or trademarks of their respective owners. Specifications subject to change without notice. 40-42482-0203 Printed in Thailand Place a sheet of blank paper in the paper rest. Start the alignment procedure. Windows: a. Start, select Control Panel, Printers and Other Hardware, then Printers and Faxes. b. Right-click the Canon i350 or i250 icon, then click . NOTE: For Windows 98/Me, click Start, , then . Rightclick the i350 or i250 icon, then click Properties. c. Click the Maintenance tab, then click the Print Head Alignment icon. d. When asked to start print head alignment, click OK. Macintosh OS X: a. Macintosh HD icon, then the Utilities folder, then the Print Center icon. Select i350 or i250. Under the Printers menu, select Configure Printer. Select i350 or i250, and click Select. b. Click the down-arrow to select Test Print. c. Click the Print Head Alignment icon. Follow the on-screen instructions. Click OK (Windows) or Send (Macintosh) when finished. Access your CD-ROM again. From the Application folder, double-click on the software to be installed. Follow the on-screen instructions. When the “ ” screen appears, click OK. When the m...
Эта инструкция также подходит к моделям:Принтеры - i350 (2.42 mb)