Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
BOLT, one (!) m IN. WASHER, and one (1) 1/2 IN. LOW HEIGHT LOCK NUT. (NOTE: TIGHTEN SWIVEL SLEEVE ENOUGH THAT IT SWIVELS FREELY, YET IT DOESN'T WOBBLE) 9. Assemble the SPRING PIN ASSEMBLY to the HOUSING on the SWIVEL SLEEVE using one (1) KNOB, one (1) PLUNGER, one (1) SPRING, one (1) SPACER, and one (1) COTTER PIN, using the following steps: A. Assemble the KNOB to the PLUNGER. B. Insert the PLUNGER through the first hole of the HOUSING. C. Slip the SPRING, and the SPACER over the end of the PLUNGER. (IN THAT ORDER) D. Insert the PLUNGER through the second hole of the HOUSING. E. Pull back SPACER on the PLUNGER, and insert the COTTER PIN through the hole. F. (SEE DETAIL A ON THE DRAWING) 10. Insert two (2) 1-1/2 IN. SQ. END CAPS into both ends of the SPRING PIN HOUSING on the SWIVEL SLEEVE. (SEE DETAIL A) 11. Insert two (2) 1-3/4 IN. SQ. END CAPS into each end of the ADJUSTABLE SLIDE. 12. Insert the multiple hole end of the ADJUSTABLE SLIDE into the SWIVEL SLEEVE until the SPRING PIN engages into the first adjustment hole. (NOTE: BE SURE SWIVEL SLEEVE IS IN THE PROPER POSITION, SEE DRAWING) Attach the other end to the ADJUSTABLE SLIDE MOUNT on the BACK PAD, using one (1) 1/2 X 3 IN. BOLT, two (2) 1/2 IN. WASHERS, and one (1) 1/2 IN. LOW HEIGHT LOCK NUT. (TIGHTEN UNTIL SNUG, THEN BACK OFF 1/4 TURN) 13. To adjust SEAT PAD use the 3/8 IN. L-PIN. (SEE DRAWING) 4 PARABODY INC FLATVINCLINE BENCH 405 PRODUCT ASSEMBLY INSTRUCTION SHEETS TOOLS REQUIRED FOR ASSEMBLY 9/16 INCH WRENCH or SOCKET ADJUSTABLE WRENCH RUBBER MALLET or HAMMER REVISION: G If you experience any problem with the assembly of this product, please contact your dealer or your PARABODY Customer Service Representative at: 1-800-328-9714 405 FLAT/INCLINE BENCH ASSEMBLY PARTS LIST SORT AND COUNT ALL PARTS BEFORE BEGINNING ASSEMBLY HARDWARE: ITEM NAME/DESCRIPTION QTY I. 1/2 X 5 IN. BOLT.......................................... ...................... 1 2. 3/8 X 3 IN. BOLT......................................... ......................6 3. 1/2X3 IN. BOLT....................................... ...................... 1 4. 3/8 X 1-1/4 IN. BOLT................................... ......................6 5. 1/2 IN. WASHER ...................................... ...................... 3 6. 3/8 IN. WASHER ......................................... .................... 18 7. 3/8 IN. LOCK WASHER.............................. .................... 10 8. 3/8 IN. NUT........................................... ...................... 4 9. 1/2 IN. LOW HEIGHT LOCK NUT............. ...................... 2 10. 3/8 IN. LOW HEIGHT LOCK NUT............. ...................... 2 11. 3/8 IN. L-PIN............................................... ...................... 1 12. 2 IN. SQ. END CAP............... ................... ...................... 5 13. 1-3/4 IN. SQ. END CAP.......................... ...................... 2 14. 1-1/2 IN. SQ. END CAP.............................. ...................... 2 15. PARAGLIDE STRIPS .................................. .................... 16 16. KNOB ........................................................... ...................... 1 17. PLUNGER .................................................... ...................... 1 18. SPRING..............................-......................... ...................... 1 19. SPACER........................................................ ...................... 1 20. COTTER PIN................................................ ...................... 1 WF.LDMFNTS/PARTS: ITEM NAME/DESCRIPTION QTY l. BASE LEG.................................................... ..............(PB2365-1)................ ....................... 2 2. BENCH FRAME........................................... ..............(PB2622-1)................ ....................... 1 3. ADJUSTABLE SLIDE MOUNT.................. ..............(PB2596-1)................ ....................... 1 4. ADJUSTABLE SLIDE ................................................(PB2623-1)....................................... 1 5. SEAT BRACKET........................................................(PB2352-1)....................................... 4 6. SWIVEL SLEEVE.......................................................(PB2620-1)....................................... 1 7. SEAT PAD..................................................................(PB2407-1)....................................... 1 8. BACK PAD..................................................................(PB2515-1)....................................... 1 NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT. mm j-BOLT LENGTH BOLT LENGTH RULER: 405 FLAT/INCLINE BENCH ASSEMBLY INSTRUCTIONS IMPORTANT: • THE BODYSMITH FLAT/INCLINE BENCH MUST BE ASSEMBLED ON A FLAT, LEVEL SURFACE TO ASSURE ITS PROPER FUNCTION. *** IMPORTANT *** KEEP ALL LOOSE FRAME CONNECTIONS LOOSE UNTIL INSTRUCTED IN THE ASSE...