Оценок - 3, средний балл: 3.7 ( )

Производитель: Canon Размер: 1.53 mb Название файла: Язык инструкции:

К этому устройству также есть другие инструкции:

Принтеры - imageCLASS MF4150 (866.92 kb)

Принтеры - imageCLASS MF4150 (5.61 mb)

Set Up the Machine Unpacking the Machine Before Setting Up the Machine . Remove all shipping tapes on the machine. . When moving the machine, grip the handles on both left and right sides of the machine and lift it carefully, as shown in the illustration right. . The shapes of your machine and supplies may differ slightly from those listed in this manual. 1 2 Do You Have Everything? .Document Feeder Tray Do You Have Everything? .Document Feeder Tray .Toner Cartridge .Machine .Dust Cover (enclosed in the machine) .Starter Guide (This Document) .Basic Guide .User Software CD .Limited Warranty Notice .Registration Card .Power Cord .Destination Labels .Telephone Cable .AXIS 1650 Network Print Server (Data sheet) Manuals for the Machine . Starter Guide (This Document): Machine set-up and software installation . Basic Guide: Basic features, maintenance, machine settings, and specifications . Advanced Guide (in User Software CD): Advanced features, system monitor, and reports and lists . Scanner Driver Guide (in User Software CD): Scanner settings from a computer 3 4 5 Install Toner Cartridge 1 Remove the toner cartridge from the bag. Keep the bag for future use. CAUTION Do not open the drum protective shutter (A). 2 Gently rock the toner cartridge several times to distribute toner inside. 3 Pull out the seal completely. NOTE Do not pull out the seal at an angle. 4 Lift the scanning platform until it is locked (A), and open the printer cover (B). 5 Hold the toner cartridge by its handle (A). 6 Align the guide (A) on the left side of the toner cartridge with the groove inside the machine. 7 Push the toner cartridge to make sure it is properly set in the machine. 8 Close the printer cover and lower the scanning platform. CAUTION – Be careful not to get your fingers caught. – If you cannot close the printer cover, do not force it to close. Open the cover and make sure the toner cartridge is properly set in the machine. A A B A A 6 7 Set Up the Paper Trays and Load Paper 1 Open the paper feeding tray. 2 Take out the dust cover from inside the machine. 3 Slide the paper guide rail (A), and then pinch and slide the side paper guides (B) to match the size of paper. 4 Fan the paper stack and even the edges. 5 Load the paper into the paper feeding tray with the print side up. Make sure the paper stack sits below the hook (A) on the side paper guide. 6 Adjust the paper guide rail to match the size of paper. 7 Aligning the protrusions (A) on the both sides of the dust cover to the guides (B) inside the machine, set the dust cover. 8 Slide the output tray extension on the front of the machine, and lift the paper stopper. 9 Attach the document feeder tray on the document feeder. NOTE – The default paper size/type setting is and . When you load other size and/or type of paper, change the paper size/type setting. For details, see Chapter 3, “Setting Paper Size and Type,” in the Basic Guide. – For loading paper in the multi-purpose tray, see Chapter 3, “Loading Paper,” in the Basic Guide. A5 B5 EXEC LTR LGL A4 B A A B A A 8 Connect Telephone Cables Connect your external telephone to the external device jack (A) if required. Connect the supplied telephone cable to the telephone line jack (B) and the wall jack. A B Connect Telephone Cables Connect your external telephone to the external device jack (A) if required. Connect the supplied telephone cable to the telephone line jack (B) and the wall jack. A B 9 10 Connect the Power Cord and Turn On the Machine Set the Date and Time 1 2 .Entering Information – Numeric keys: Enters numbers. – [ ] or [ ]: Moves the cursor position. – [OK]: Confirms the entry. Connect the power cord into the rear socket and the wall outlet, and press the [I] side of the main power switch to ON. The machine enters the standby mode. 1 Press [Additional Functions]. 2 Use [ ] or [ ] to select <4 TIMER SETTINGS>, then press [OK]. 3 Use [ ] or [ ] to select <2 DATE&TIME SETTING>, then press [OK]. 4 Use the numeric keys to enter the time (in 24-hour format) and date (month/ day/year), then press [OK]. 5 Press [Stop/Reset] to return to the standby mode. NOTE – You can select the date format among three types listed below at <3 DATE TYPE SELECT>. – –

– – By default, <4 DAYLIGHT SV.TIME> in the <4 TIMER SETTINGS> menu is set to . If you want to set <4 DAYLIGHT SV.TIME> in the <4 TIMER SETTINGS> menu to , see Chapter 1, “Before Using the Machine,” in the Basic Guide. Main power switch TEXT/PHOTO 1 100% LTR Ex. [OK] Numeric Keys [ ][ ] [Stop/Reset] [Additional Functions] Ex. DATE&TIME SETTING 11:19 12 31 .06 Connect the Power Cord and Turn On the Machine Set the Date and Time 1 2 .Entering Information – Numeric keys: Enters numbers. – [ ] or [ ]: Moves the cursor position. – [OK]: Confirms the entry. Connect the power cord into the rear socket and the wall outlet, and press the [I] side of the main power switch to ON. The machine enters the standby mode...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: