Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Contact your sales representatives to obtain the list of available supplies, and maintenance parts. 443. Maintenance Ordering supplies and accessories To order Samsung-authorized supplies, accessories, and maintenance parts, contact your local Samsung dealer or the retailer where you purchased your machine. You can also visit and then select your country/region to obtain the contact information for service. 453. Maintenance Available supplies When supplies reach the end of their life spans, you can order the 453. Maintenance Available supplies When supplies reach the end of their life spans, you can order the following types of supplies for your machine: Type Average yielda Part name Standard yield toner cartridge Approx. 1,500 pages MLT-D103S High yield toner cartridge Approx. 2,500 pages MLT-D103L a. Declared yield value in accordance with ISO/IEC 19752. Depending on the options, percentage of image area, and job mode used, the toner cartridge’s lifespan may differ. When purchasing new toner cartridges or other supplies, these must be purchased in the same country as the machine you are using. Otherwise, new toner cartridges or other supplies will be incompatible with your machine due to different configurations of toner cartridges and other supplies according to the specific country conditions. Samsung does not recommend using non-genuine Samsung toner cartridge such as refilled or remanufactured toner. Samsung cannot guarantee non-genuine Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine’s warranty. 463. Maintenance Available maintenance parts To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by 463. Maintenance Available maintenance parts To purchase maintenance parts, contact the source where you bought the machine. Replacing maintenance parts can be performed only by an authorized service provider, dealer, or the retailer where you bought the machine. The warranty does not cover the replacement of any maintenance parts once it has reached its “Average yield”. Maintenance parts are replaced at specific intervals to avoid print quality and paper feed problems resulting from worn parts, see table below. The purpose of which is to maintain your machine in top working condition. The maintenance parts below should be replaced when the life span of each item has been met. Parts Average yielda Fuser unit Approx. 50,000 pages Transfer roller Approx. 100,000 pages Forward roller Approx. 50,000 pages Feed roller Approx. 50,000 pages Pickup roller Approx. 50,000 pages Semi-retard roller Approx. 50,000 pages a. It will be affected by the operating system used, computing performance, application software, connecting method, media type, media size and job complexity. 473. Maintenance Redistributing toner When the toner cartridge is near the end of its life: 473. Maintenance Redistributing toner When the toner cartridge is near the end of its life: • White streaks or light printing occurs and/or density variation side to side. •The Toner LED blinks yellow. If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. • Before opening the front cover, close the output support first. • If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. 1 2 • Before opening the front cover, close the output support first. • Do not use sharp objects such as a knife or scissors to open the toner cartridge package. They might scratch the drum of the cartridge. 483. Maintenance Replacing the toner cartridge • If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. • Shake the toner cartridge thoroughly, it will increase the initial print quality. • Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area. Replacing the toner cartridge 3. Maintenance 49 When a toner cartridge has reached the end of life, the machine will stop printing. 1 2 Cleaning the machine 3. Maintenance 50 If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep it in 503. Maintenance Cleaning the machine If printing quality problems occur or if you use your machine in a dusty environment, you need to clean your machine regularly to keep it in the best printing condition and use your machine longer. • Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvents, or other strong substances can discolor or distort the cabinet. • If your machine or the surrounding area is conta...
Эта инструкция также подходит к моделям:Принтеры - ML-2950D (10.94 mb)
Принтеры - ML-2950DR (10.94 mb)
Принтеры - ML-2950ND (10.94 mb)
Принтеры - ML-2950ND/GOV (10.94 mb)