Оценок - 2, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Storing a Number for One-Touch Dialling 1 Press and hold one of the one-touch dial buttons for about 2 seconds. If you want to use one-touch dial buttons from 21 to 40, press Shift and press and hold the one-touch dial buttons for about 2 seconds. The LCD display asks you to enter the fax number. “T” signifies you are assigning a one-touch number and “xx” designates the selected one-touch button. If a number is already stored in the location you chose, the LCD display shows the number to allow you to change the number. To start over with another one-touch button, press Stop/Clear. 2 Enter the number you want to store by using the number keypad and then press Mode/Enter. To insert a pause between numbers, press Redial/Pause and a “–” appears on the LCD display. If you make a mistake while entering a number, press Search/Delete and re-enter the correct number. 3 To assign a name to the number, enter the desired name. For details on how to enter names, see “Entering Characters Using the Number Keypad” on page 1.6. Or, If you do not want to assign a name, skip this step. AUTOMATIC DIALLING4.2 4 Press Mode/Enter when the name appears correctly or simply without entering a name. 5 To store more telephone numbers, press the desired one- touch button and repeat steps 2 through 4. Or To return to Standby mode, press Menu/Exit or Stop/Clear. Sending a Fax using a One-Touch Number 1 Feed the document(s) face up into the ADF. Or Place a single document on the document glass face down. 2 Make sure that the product is in the Fax mode. If necessary, press Mode/Enter to change the mode into the Fax mode. In the Fax mode, the LCD display shows: 4 3 Adjust the resolution and the contrast to suit your fax needs if necessary. For details, see “Adjusting Document Settings” on page 2.4. 4 Press the one-touch button where you stored a number. 5 The document scans into memory. If the document is loaded on the document glass, the LCD display asks if you want to send another page. Select “1.YES” to add more documents or “2.NO” to begin transmission immediately. 6 The fax number stored in the one-touch dial location will be automatically dialled and then the document will be sent when the remote fax machine answers. AUTOMATIC DIALLING 4.3 Using the One-Touch Sheet A one-touch sheet is included with your product. Once you store numbers in one-touch dial buttons, make a note of the numbers on the sheet to remind you which number is stored in each button. 1 Remove the clear cover and label. 2 Write information on the sheet and replace the sheet and cover. You may want to use pencil in case you wish to change these numbers later. 3 Replace the label and clear cover. AUTOMATIC DIALLING4.4 Speed Dialling You can store up to 80 numbers in one or 2-digit Speed Dial locations (1-80). Storing a Number for Speed Dialling 1 Press and hold Speed/Status on the control panel for about 2 seconds. 2 Enter a speed dial number by using the number keypad and press Mode/Enter. If a number is already stored in the location you chose, the LCD display shows the number to allow you to change the number. To start over with another speed-dial number, press Stop/Clear. 3 Enter the number you want to store by using the number keypad and press Mode/Enter. To insert a pause between numbers, press Redial/Pause and a “P” appears on the LCD display. 4 NOTE: If you make a mistake while entering numbers, press at the end of the entries to delete the last digit or press Search/ Delete to delete all digits you entered. When the cursor is in the first digit or in the middle of the number, you can use or to move the cursor under the wrong digit to correct. 4 To assign a name to the number, enter the desired name. For details on how to enter names, see “Entering Characters Using the Number Keypad” on page 1.6. Or, If you do not want to assign a name, skip this step. AUTOMATIC DIALLING 4.5 5 Press Mode/Enter when the name appears correctly or simply without entering a name. 6 To store more telephone numbers, repeat steps 2 through 5. Or To return to Standby mode, press Menu/Exit or Stop/Clear. Sending a Fax using a Speed Number 1 Feed the document(s) face up into the ADF. Or Place a single document on the document glass face down. 2 Make sure that the product is in the Fax mode. If necessary, press Mode/Enter to change the mode into the Fax mode. In the Fax mode, the LCD display shows: 3 Adjust the document settings if necessary. For details, see “Adjusting Document Settings” on page 2.4. 4 Press Speed/Status on the control panel. 5 Enter the speed dial number. 6 When the desired number appears on the LCD display, press Mode/Enter. 7 The document scans into memory. If the document is loaded on the document glass, the LCD display asks if you want to send another page. Select “1.YES” to add more documents or “2.NO” to begin transmission immediately. 8 The fax number stored in the speed dial location will be automatically dialled, then the document will be sent when the remote ...
Эта инструкция также подходит к моделям:Принтеры - SCX-5312F (2.52 mb)