Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
5. Enter the printer’s new information into the configuration window as follows. In a corporate intranet, you may need to have this information assigned by a network manager before proceeding. • MAC Address: Find the machine’s MAC address from the Network Configuration Report and enter it without the colons. For example, 00:15:99:29:51:A8 becomes 0015992951A8. MAC address is a hardware serial number of the machine’s network interface and can be found in the Network Configuration Report. (See "Printing out the machine’s MAC address" on page 32.) • IP Address: Enter a new IP address for your machine. • Subnet Mask: Enter a new Subnet Mask for your machine. • Default Gateway: Enter ta new Gateway for your machine. 6. Select Apply, then OK, and OK again. The printer will automatically print the configuration report. Confirm that all the settings are correct. Quit Safari. You may close and eject the installation CD-ROM. If necessary, restart the computer’s firewall. You have successfully changed the IP address, subnet mask, and gateway. IP setting using SetIP Program (Linux) SetIP program should be automatically installed during the printer driver installation. You can only use IPv4 setting for SetIP. 1. Print the machine’s network configuration report to find your machine’s MAC address. (See "Printing out the machine’s MAC address" on page 32.) 2. Open the /opt/Samsung/mfp/share/utils/. 3. Double click the SetIPApplet.html file. 4. Click to open the TCP/IP configuration window. 5. Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply. When you enter the MAC address, enter it without a colon(:). 6. The machine prints the network information. Confirm all the settings are correct. 7. Close the SetIP program. UNDERSTANDING THE KEYBOARD You can enter alphabet characters, numbers, or special symbols using the keyboard on the touch screen. This keyboard is specially arranged like a normal keyboard for better usability for the user. Touch the input area where you need to enter characters and the keyboard pops up on the screen. The keyboard below is the default showing the lowercase letters. 1 2 3 4 5 6 7 8 Left/Right Moves the cursor between characters in the input area. Backspace Deletes the character on the left side of the cursor. Delete Deletes the character on the right side of the cursor. Clear Deletes all characters in the input area. Input area Enters letters within this line. Shift Toggles between lowercase keys and uppercase keys or vice versa. Symbols Switches from the alphanumeric keyboard to thesymbol keyboard. Space Enters a blank between characters. 32 9 9 OK Saves and closes input result. 10 Cancel Cancels and closes input result. If you enter the email address, then the keyboard for email pops up. After you enter the address, press OK to activate entered address. Press the arrow key on the side for rotating between From, To, Cc, Bcc, Subject, Message in order. • Samsung Easy Document Creator is an application to help users scan, compile, and save documents in multiple formats, including .epub format.These documents can be shared via social networking sites or fax. 34 loading originals and print media This chapter introduces you to how to load originals and print media into your machine. This chapter includes: • Loading originals • Selecting print media • Loading paper • Setting the paper size and type LOADING ORIGINALS You can use the scanner glass or DADF to load an original for copying, scanning, and sending a fax. On the scanner glass Make sure that no originals are in the DADF. If an original is detected in the DADF, the machine gives it priority over the original on the scanner glass. To get the best scan quality, especially for colored or gray-scaled images, use the scanner glass. 1. Lift and open the scanner lid. 2. Place the original face down on the scanner glass and align it with the registration guide at the top left corner of the glass. 3. Close the scanner lid. In the DADF Using the DADF, you can load up to 100 sheets of paper (75 g/m2, 20 lb) for one job. When you use the DADF: • Do not load paper smaller than 174 x 128 mm (5.6 x 5.8 inches) or larger than 218 x 356 mm (8.5 x 14 inches). • Do not attempt to load the following types of paper: - carbon-paper or carbon-backed paper - coated paper - onion skin or thin paper - wrinkled or creased paper - curled or rolled paper - torn paper • Remove all staples and paper clips before loading. • Make sure any glue, ink, or correction fluid on the paper is completely dry before loading. • Do not load originals that include different sizes or weights of paper. • Do not load booklets, pamphlets, transparencies, or documents having other unusual characteristics. To load an original into the DADF: 1. Load the original face up into the DADF. Make sure that the bottom of the original stack matches the paper size marked on the document input tray. • Leaving the scanner lid open while copying may affect copy...
Эта инструкция также подходит к моделям:Принтеры - SCX-6545N (20.13 mb)
Принтеры - SCX-6545N/CAS (20.13 mb)
Принтеры - SCX-6545N/KRA (20.13 mb)
Принтеры - SCX-6545N/KRC (20.13 mb)