Оценок - 4, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If you install the optional stacker & stapler, then the staple related option appears. (See "Deciding the form of copy output (Collated / Staple)" on page 45.) Original Type: Improves the copy quality by selecting the document type for the current copy job. (See "Selecting the type of originals" on page 45.) Light, Dark: Adjusts the brightness level to make a copy that is easier to read, when the original contains faint markings and dark images. (See "Changing the darkness" on page 45.) Paper Supply: Selects the paper supply tray. • Changing the settings for each copy • Using special copy features Advanced tab • ID Copy: Prints 2-sided originals on one sheet of paper. This feature is helpful for copying a small-sized item, such as a business card. (See "ID card copying" on page 45.) • N-Up: Prints 2 or 4 original images, reduced to fit onto one sheet of paper. (See "Copying ID with the manual ID copy option" on page 46.) • Poster Copy: Prints a large image into divided 9 pages. (See "Poster copying" on page 47.) • Clone Copy: Prints multiple image copies from the original document on a single page. (See "Clone copying" on page 47.) • Book Copy: Allows you to copy an entire book. (See "Book copying" on page 47.) • Booklet: Creates booklets from a sequential set of either 1-sided or 2-sided originals. (See "Booklet copying" on page 47.) • Covers: Automatically adds covers to your copied set using stock taken from a different tray. (See "Cover copying" on page 48.) • Transparencies: Adds a blank or printed divider between transparencies within a set. (See "Transparency copying" on page 48.) • WaterMark: Prints an image with the added watermark. (See "Watermark copying" on page 49.) • Overlay: Prints an image with the image previously stored in your machine. (See "Overlay copying" on page 49.) • Auto Crop: Prints only the image of an original after cropping the blank parts like the margin. (See "Auto crop copying" on page 49.) 42 Image tab • Erase Edge: Allows you to erase punch holes, staple marks, and fold creases along any of the four documents edges. (See "Erasing edges" on page 48.) • Erase Background: Prints an image with no background. (See "Erasing background images" on page 48.) • Margin Shift: Creates a binding edge for the document. (See "Shifting margins" on page 49.) COPYING ORIGINALS This is the normal and usual procedure for copying your originals. 1. Press Copy from the Main screen. 2. Place originals, face up, in the DADF, or you can use the scanner glass with a single original document face down. 3. Adjust the settings for each copy such as Original Size, Reduce/ Enlarge, Duplex and more. (See "Changing the size of originals" on page 43., see "Copying on both sides of originals (Duplex)" on page 44.) 4. Select the tray by pressing the appropriate tray on screen. 5. Enter the number of copies using the number keypad, if necessary. If you want to copy originals on the scanner glass and copy more than two copies, the message Another Page? appears after the first page copied. At this time, if you select No, the machine starts copying the rest of your originals and sorts the copied papers in order. Because the default value of theOutput option is Collated. 6. Press Start on the control panel to begin copying. To cancel the current copy job, press Stop on the control panel. Or you can delete the current and pending job using Job Status on the control panel. Select the job you want to cancel and press Delete. CHANGING THE SETTINGS FOR EACH COPY On the Basic tab of the Copy screen, you can select copy features before starting to copy. The Basic tab setting is only for each copy. That means that the setting does not apply to the next copy job. After finishing the current copy job, the machine automatically restores the default settings after certain time. Or the machine resume to default setting when you press the Clear All button on the control panel or when you press other menu such as fax or else except the Job Status screen. The default copy setting can be changed in Admin Setting. (See "General settings" on page 76.) Changing the size of originals Press the Basic tab > Original Size, then use left/right arrows to set the original size. Press more to see the detail values. • Custom: Selects the scanning area of the original. Press the cardinal point arrows to set the size. • Auto: Automatically detects the size of originals, but this option supports only when originals are Legal, Letter, or A5 sized. If the originals is mixed-sized, then the machine detects the largest original size and select the largest-sized paper in the tray. • Mixed Size (Letter & Legal): Allows for the use of both of Letter and Legal sized papers together, and the machine uses the proper-sized paper from several trays. For example, if the originals are total 3 43 pages, 1st page is the letter-sized paper, 2nd page is the legal-sized paper, and 3rd page is the letter-sized paper, then the machine prints the output first letter...
Эта инструкция также подходит к моделям:Принтеры - SCX-6545N (20.13 mb)
Принтеры - SCX-6545N/CAS (20.13 mb)
Принтеры - SCX-6545N/KRC (20.13 mb)
Принтеры - SCX-6545N/KRD (20.13 mb)