Оценок - 2, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Some menus may not appear in the display depending on options or models. If so, it is not applicable to your machine. To change the menu options: • Press Menu > Network on the control panel. •Or press Setup > Machine Setup > Network Setup on the touch screen. Option Description TCP/IP (IPv4) Selects the appropriate protocol and configure parameters to use the network environment. There are lots of parameters to be set. If you are not sure, leave as is, or consult the network administrator. TCP/IP (IPv6) Selects this option to use the network environment through IPv6 (see "IPv6 configuration" on page 28). Ethernet Speed Configure the network transmission speed. System setup 803. Useful setting menus 802.1x You can selects the user authentication for network communication. For detailed information consult the network administrator. Wireless Selects this option to use the wireless network. Clear Setting Reverts the network settings to the default values. (Reboot required.) Network Conf. (Network Configuration) This list shows information on your machine’s network connection and configuration. Net. Activate You can sets whether to use Ethernet on or off. Http Activate You can sets whether to use SyncThru™ Web Service or not. Option Description System setup 803. Useful setting menus 802.1x You can selects the user authentication for network communication. For detailed information consult the network administrator. Wireless Selects this option to use the wireless network. Clear Setting Reverts the network settings to the default values. (Reboot required.) Network Conf. (Network Configuration) This list shows information on your machine’s network connection and configuration. Net. Activate You can sets whether to use Ethernet on or off. Http Activate You can sets whether to use SyncThru™ Web Service or not. Option Description 813. Useful setting menus Custom setup This menu appears only when the XOA (eXtensible Open 813. Useful setting menus Custom setup This menu appears only when the XOA (eXtensible Open Architecture) web application is installed. Contact the administrator to use this menu. To change the menu options: • Press Menu > Custom on the control panel. 4. Special features This chapter explains special copying, scanning, faxing, and printing features. • 4. Special features This chapter explains special copying, scanning, faxing, and printing features. • Altitude adjustment 83 • Changing the font setting 84 • Storing email address 85 • Entering various characters 87 • Setting up the address book 88 • Registering authorized users 91 • Printing features 92 • Fax features 109 • Scan features 118 • Using shared folder features 127 • Using memory/hard drive features 128 ..• The procedures in this chapter are mainly based on Windows 7. • It may be necessary to press OK to navigate to lower-level menus for some models. 834. Special features Altitude adjustment Print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine for • If your machine is connected to the network, you can set the altitude via SyncThru™ Web Service. 834. Special features Altitude adjustment Print quality is affected by atmospheric pressure, which is determined by the height of the machine above sea level. The following information will guide you on how to set your machine for • If your machine is connected to the network, you can set the altitude via SyncThru™ Web Service. the best print quality. Before you set the altitude value, determine the altitude where you are. 4,000 m 3,000 m2,000 m1,000 m 4321(13,123 ft) (9,842 ft) (6,561 ft) 1 High 3 2 High 2 (3,280 ft) 3 High 1 0 4 Normal You can set the altitude value from Device Settings or Machine section in Printer Settings Utlity program. • For Windows user, see "Device Settings" on page 138. • For Macintosh, Linux, or Unix OS user, see "Using Smart Panel (Macintosh and Linux only)" on page 140. • You can also set the altitude in System Setup option on the machine’s display. 844. Special features Changing the font setting Your machine has preset the font for your region or country. 844. Special features Changing the font setting Your machine has preset the font for your region or country. If you want to change the font or set the font for special condition, such as the DOS environment, you can change the font setting from Emulation section in Printer Settings Utility program. • For Windows user, see "Advanced settings user interface overview" on page 137. • For Macintosh, Linux, or Unix OS user, see "Using Smart Panel (Macintosh and Linux only)" on page 140. • If your machine is connected to the network, you can set the font setting via SyncThru™ Web Service. • You can also change the font setting in Emulation option on the machine’s display. • The following information shows the proper font list for corresponding languages. -Russian: CP866, ISO 8859/5 Latin Cyrillic -H...
Эта инструкция также подходит к моделям:Принтеры - SCX-4833FD (19.73 mb)
Принтеры - SCX-4833FD/SED (19.73 mb)
Принтеры - SCX-4833FR (19.73 mb)
Принтеры - SCX-4833HD (19.73 mb)