Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
See page 4.3. 3 Press Copies and enter the number of copies using the scroll button ( or ), if necessary. 4 Press Start to begin copying. The display shows the copy processing. NOTE: You can cancel the copy job during an operation. Press Stop/Clear, and the copying will stop. Changing the settings for each copy The buttons on the control panel let you select all basic copy options: darkness, document type and copy size. Set the following options for the current copy job before pressing Start to make copies. NOTE: If you press Stop/Clear while setting the copy options, all of the options you have set for the current copy job will be canceled and returned to their default status. Reduced/Enlarged copy You can reduce or enlarge the size of a copied image from 50% to 200% when you copy original documents from the document glass. To select from the predefined copy sizes: 1 Press Menu then Reduce/Enlarge appears. 2 Press the scroll button ( or ) to select the size setting you want and press OK. To fine-tune the size of copies: 1 Press Menu then Reduce/Enlarge appears. 2 Press the scroll button ( or ) until Custom:50-200% appears and press OK. 3 Press the scroll button ( or ) to enter the copy size you want. Pressing and holding the button allows you to quickly scroll to the number you want. 4 Press OK to save the selection. NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy. Darkness If you have an original document containing faint markings and dark images, you can adjust the brightness to make a copy that is easier to read. 1 Press Menu until Darkness appears on the top line of the display. 2 Press the scroll button ( or ) to select the contrast mode you want. • Light: works well with dark print. • Normal: works well with standard typed or printed documents. • Dark: works well with light print or faint pencil markings. 3 Press OK to save the selection. Original type The original type setting is used to improve the copy quality by selecting the document type for the current copy job. 1 Press Menu until Original Type appears on the top line of the display. 2 Press the scroll button ( or ) to select the image mode you want. • Text: Use for documents containing mostly text. • Text/Photo: Use for documents with mixed text and photographs. • Photo: Use when the originals are photographs. 4.1 Copying Copying 4.2 3 Press OK to save the selection. Changing the default settings The copy options, including darkness, original type, copy size and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the menus on the control panel. To create your own default settings: 1 Press Menu until Copy Setup appears on the top line of the display. 2 Press OK when Default-Change appears. 3 Press the scroll button ( or ) to select a setup option and press OK. 4 Press the scroll button ( or ) to change the setting or enter the value and press OK. 5 Repeat steps 3 through 4, as needed. 6 Press Stop/Clear to return to Standby mode. NOTE: While you are setting copy options, pressing Stop/ Clear cancels the changed settings and restores their default status. Using special copy features Clone copying This feature prints multiple image copies from the original document on a single page. The number of images is automatically determined by the original image and paper size. 1 Place the document to be copied on the document glass, and close the cover. 2 Press Menu until Special Copy appears on the top line of the display. 3 Press the scroll button ( or ) until Clone appears and press OK. 4 Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See 3 Press OK to save the selection. Changing the default settings The copy options, including darkness, original type, copy size and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the menus on the control panel. To create your own default settings: 1 Press Menu until Copy Setup appears on the top line of the display. 2 Press OK when Default-Change appears. 3 Press the scroll button ( or ) to select a setup option and press OK. 4 Press the scroll button ( or ) to change the setting or enter the value and press OK. 5 Repeat steps 3 through 4, as needed. 6 Press Stop/Clear to return to Standby mode. NOTE: While you are setting copy options, pressing Stop/ Clear cancels the changed settings and restores their default status. Using special copy features Clone copying This feature prints multiple image copies from the original document on a single page. The number of images is automatically determined by the original image and paper size. 1 Place the document to be copied on the document glass, and close the cover. 2 Press Menu until Special Copy appears on the top line of the display. 3 Press the scroll button ( or ) ...
Эта инструкция также подходит к моделям:Принтеры - SCX-4200 (3.24 mb)
Принтеры - SCX-4200L (3.24 mb)
Принтеры - SCX-4200R (3.24 mb)
Принтеры - Mono Multifunction Printer SCX-4200 Series (3.24 mb)