2 Click to open the TCP/IP configuration window. 3 Enter the machine’s new information into the configuration window. In 4 a corporate intranet, you may need to have this information assigned by a network manager before proceeding. 2. Using a Network-Connected Machine 153 Installing driver over the network 3 Select Install Now. • Some features and optional goods may not be available depending on model or country (see "Features by models" on page 7). • The machine that does not support the network interface, it will not be able to use this feature (see "Rear view" on page 22). • You can install the printer driver and software when you insert the software CD into your CD-ROM drive. For windows, select the printer driver and software in the Select Software to Install window. Windows Make sure that the machine is connected to the network and powered 1 on. Also, your machine’s IP address should have been set (see "Setting IP address" on page 151). Insert the supplied software CD into your CD-ROM drive. 2 Read License Agreement, and select I accept the terms of the License 4 Agreement. Then, click Next. If your machine is not found on the network or locally, an error message appears. Select the option you want and click Next. Choose the option in Using Enhanced Features and Participating in 5 Printer Usage Information Collection Program. Then, click Next. 2. Using a Network-Connected Machine 154 Installing driver over the network Installing driver over the network Select Network connection on the Printer Connection Type screen. 6 Following command-line are effective and operated when command is If the Connect Device window appears, check that the machine is used with /s or /S. But /h, /H or /? are exceptional commands that can be 7 connected to your network. Then, click Next. operated solely. The firewall software might be blocking network communication. Before connecting the device to the network, disable the computer’s firewall. Command- line Definition Description /s or Starts silent installation. Installs machine drivers /S without prompting any UIs or user intervention. /p”” or /P”” Specifies printer port. Network Port will be created by use of Standard TCP/IP Port monitor. For local port, this port must exist on system before being specified by command. Printer port name can be specified as IP address, hostname, USB local port name or IEEE1284 port name. For example: • /p”xxx.xxx.xxx.xxx” in where, “xxx.xxx.xxx.xxx” means IP address for network printer. / p”USB001”, /P”LPT1:”, / p”hostname” The searched machines will be shown on the screen. Select the one you 8 wish to use and click OK. Follow the instructions in the installation window. 9 Silent installation Mode Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window. Command-line Parameters Following table shows commands that can be used in the command window. 2. Using a Network-Connected Machine 155 Installing driver over the network /a”” or /A”” Specifies destination path for installation. The destination path should be a fully qualified path. Since machine drivers should be installed on the OS specific location, this command applies to only application software. /n”” or /N”” Specifies printer name. Printer instance shall be created as specified printer name. With this parameter, you can add printer instances as your wishes. /nd or /ND Commands not to set the installed driver as a default machine driver. It indicates installed machine driver will not be the default machine driver on your system if there are one or more printer drivers installed. If there is no installed machine driver on your system, then this option won’t be applied because Windows OS will set installed printer driver as a default machine driver. Command- line Definition Description /x or /X Uses existing machine driver files to create printer instance if it is already installed. This command provides a way to install a printer instance that uses installed printer driver files without installing an additional driver. /up”” or /UP”” Removes only specified printer instance and not the driver files. This command provides a way to remove only specified printer instance from your system without effecting other printer drivers. It will not remove printer driver files from your system. /d or /D Uninstalls all device drivers and applications from your system. This command will remove all installed device drivers and application software from your system. /v”” or /V”” Shares installed machine and add other available platform drivers for Point & Print. It will install all supported Windows OS platform’s machine drivers to system and share it with s...
)
