Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Condition Suggested Solutions A Troubleshooting_ 13 Toner particles are around bold characters or pictures The toner might not adhere properly to this type of paper. •Change the printer option and try again. Go to the Printing Preferences, click the Paper tab, and set the paper type to Recycled. Misformed characters •If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try different paper (See "Selecting print media" on page 2). •If characters are improperly formed and producing a wavy effect, the scanner unit may need service, For service, contact a service representative. Page skew •Ensure that the paper is loaded properly. •Check the paper type and quality (See "Selecting print media" on page 2). •Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack. Curl or wave •Ensure that the paper is loaded properly. •Check the paper type and quality. Both high temperature and humidity can cause paper curl (See "Selecting print media" on page 2). •Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. Wrinkles or creases •Ensure that the paper is loaded properly. •Check the paper type and quality (See "Selecting print media" on page 2). •Turn the stack of paper over in the tray. Also try rotating the paper 180° in the tray. Condition Suggested Solutions AaBbCAaBbCAaBbCAaBbCcAaBbCc Back of printouts are dirty Check for leaking toner. Clean the inside of the machine (See "Cleaning the inside" on page 1). Solid Color or Black pages •The toner cartridge may not be installed properly. Remove the cartridge and reinsert it. •The toner cartridge may be defective and need replacing. Remove the toner cartridge and install a new one (See "Replacing the toner cartridge" on page 2). •The machine may require repair. Contact a service representative. Loose toner •Clean the inside of the machine (See "Cleaning the inside" on page 1). •Check the paper type and quality (See "Selecting print media" on page 2). •Remove the toner cartridge and install a new one (See "Replacing the toner cartridge" on page 2). •If the problem persists, the machine may require repair. Contact a service representative. Character Voids Character voids are white areas within parts of characters that should be solid black. •If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. •You may be printing on the wrong surface of the paper. Remove the paper and turn it over. •The paper may not meet paper specifications (See "Selecting print media" on page 2). Horizontal stripes If horizontally aligned black streaks or smears appear: •The toner cartridge may be installed improperly. Remove the cartridge and reinsert it. •The toner cartridge may be defective. Remove the toner cartridge and install a new one (See "Replacing the toner cartridge" on page 2). •If the problem persists, the machine may require repair. Contact a service representative. Condition Suggested Solutions AAAaBbCAaBbCAaBbCAaBbCAaBbC Troubleshooting_ 14 Copying problemsScanning problems Curl If the printed paper is curled or paper does not feed into the machine: •Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray. •Change the printer option and try again. Go to printer properties, click Paper tab and set type to Thin Paper (See "Opening printing preferences" on page 2). An unknown image repetitively appears on a few sheets or loose toner, light print, or contamination occurs. Your machine is probably being used at an altitude of 1,000 m (3,281 ft.) or above. The high altitude may affect the print quality such as loose toner or light imaging. You can select a correct altitude of your machine location (See "Altitude adjustment" on page 1). Condition Suggested solution Copies are too light or too dark. Use Darkness in Copy feature to lighten or darken the backgrounds of copies (See "Changing the settings for each copy" on page 1). Smears, lines, marks, or spots appear on copies. •If the defects are on the original, use Darkness in Copy feature to lighten the background of your copies (See "Changing the settings for each copy" on page 1). •If there are no defects on the original, clean the scan unit (See "Cleaning the scan unit" on page 3). Copy image is skewed. •Ensure that the original is face down on the scanner glass. •Check that the copy paper is loaded correctly. Blank copies print out. Ensure that the original is face down on the scanner glass. Image rubs off the copy easily. •Replace the paper in the tray with paper from a new package. •In high humidity areas, do not leave paper in the machine for extended periods of time. Frequent copy paper jams occur. •Fan the stack of paper, then turn it over in the tray. Replace the paper in the tray with a fresh supply. Check/adjust the paper guides, if necessary. •Ensure that th...
Эта инструкция также подходит к моделям:Принтеры - CLX-3180K (13.97 mb)
Принтеры - CLX-3185 (13.97 mb)
Принтеры - CLX-3185FN (13.97 mb)
Принтеры - CLX-3185FW (13.97 mb)