Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Draft The fastest print speed, but the lowest quality. Photo Paper Quality Automatic (default) The printer detects when you load photo paper and sets Best quality automatically. Brightness Normal (default) -3 to +3 Lightens or darkens the copy. Normal is no change from the original; -3 is the darkest; +3 is the lightest. Preview No (default) Yes To see a preview of the photograph on the LCD, select Yes. Save as Defaults No / Yes To save the settings as the new default, press OK. With Yes selected, press OK. 6. Press Start to begin copying. Changing the number of copies of a photograph To change the number of copies: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass. 2. Close the lid. Copying 3. Press Home. 4. Press to select Copy Photo, then press OK. 5. Make sure Quantity is selected. 6. Press or to select a number. 7. Press Start to begin copying. Enlarging or reducing a photograph To enlarge or reduce the size of the copy: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass. 2. Close the lid. 3. Press Home. 4. Press to select Copy Photo, then press OK. 5. Press to select Copy Size. 6. Press or to select the copy size. 7. Press Start to begin copying. KODAK ESP 5200 Series All-in-One Printer Darkening or lightening a copy of a photograph To darken or lighten the copy: 1. Lift the scanner lid, and place the photograph face down in the right-front corner of the scanner glass. 2. Close the lid. 3. Press Home. 4. Press to select Copy Photo, then press OK. 5. Press to select Brightness. 6. Press to select a number below zero for a darker copy, or press to select a number above zero for a lighter copy. 7. Press Start to begin copying. 6 6 Scanning Scanning digitizes documents and pictures, and sends the digital files to your computer. When you scan, the digital file can: • Open in Home Center Software (when connected to a computer with WINDOWS OS) • Open in a third-party scanner software • Be saved in a format and location that you determine (see Changing the scan settings for scanning from the control panel, page 34) Scanning from a software program on the computer (such as Home Center Software) gives you more options, but you can also scan from the printer control panel. Before you begin scanning Make sure that the printer is connected to a computer using a USB cable or wireless network (see Chapter 2 , Networking Your Printer). Changing the scan settings for scanning from the control panel Make sure that Home Center Software is installed on the computer. (If not, go to or and follow the on-screen instructions to install the KODAK All-in-One Printer Software.) Then change the scan settings in Home Center Software. The printer uses these settings when you scan from the printer control panel. 1. Open Home Center Software. 2. Select Tools and Documentation (when connected to a computer with WINDOWS OS) or Tools (when connected to a computer with MAC OS). 3. Select Printer Scan Settings. 4. Adjust settings for scanning documents and pictures as described below. To adjust settings for scanning documents, select the Document tab, then select an option for each setting: Setting Options Scan As Black and white Color Grayscale File format .pdf .rtf (available only when connected to a computer with WINDOWS OS) .tif .jpg .bmp (available only when connected to a computer with MAC OS) KODAK ESP 5200 Series All-in-One Printer Setting Options Resolution (dpi) 75 150 200 300 File Save Prompt for File Name and Location Automatically Save - specify: • Base name; by default, scanned files are names “scan1”, “scan2”, and so on. • Location (folder) where the scanned files will be saved To adjust settings for scanning pictures, select the Picture tab, then select an option for each setting: Setting Options Scan As Black and white Color Grayscale File format .jpg .bmp .tif Resolution (dpi) 75 150 300 600 Quality When connected to a computer with WINDOWS OS: •Best for E-mail •Normal •High •Maximum When connected to a computer with MAC OS, a slider bar with: •Least •Medium •Best Scanning Setting Options Automatically When selected, multiple pictures placed on the scanner glass Detect Pictures are saved as separate files. (when connected to a computer with WINDOWS OS) or Auto Crop (when connected to a computer with MAC OS) File Save Prompt for File Name and Location Automatically Save - specify: • Base name; by default, scanned files are names “scan1”, “scan2”, and so on. • Location (folder) where the scanned files will be saved Before saving a scanned file, you can preview it in Home Center Software version 6.0, crop and sharpen the image, and adjust color, if desired. On a computer with WINDOWS OS, see the Home Center...
Эта инструкция также подходит к моделям:Принтеры - ESP 1.2 (663.73 kb)
Принтеры - ESP 7250 (663.73 kb)