Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
1.1 Recommended Tools Tape Measure Regular Screwdriver Phillips Screwdriver CARE INSTRUCTIONS: DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH. DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE. TOWEL RING, ROBE HOOK and TISSUE HOLDER MOUNTING BRACKET INSTALLATION The TOWEL RING, ROBE HOOK and TISSUE HOLDER work best if secured to a wall stud or cross brace within the wall, using 1-1/2" long SCREWS (3) not supplioed. If the TOWEL RING, ROBE HOOK and TISSUE HOLDER are to be installed on a tile or plaster wall the ANCHORS (4) and SCREWS (2) should be used. Determine desired height and location (optional) for the accessory and mark a center line. If MOUNTING BRACKET (1) is secured to a stud or cross brace drill small pilot holes for SCREWS (3). (NOTE PROPER POSITION OF MOUNTING BRACKET FOR ACCESSORY TO BE INSTALLED.} For installations on drywall or tiled walls, use ANCHORS (4) and SCREWS (2) for securing MOUNTING BRACKETS (1) to wall. Use MOUNTING BRACKET (1) as a template and mark the mounting holes. Drill three 1/8" diameter holes a minimum of 1-1/4" deep. Insert the three ANCHORS (4) flush with face of the finished wall. Secure MOUNTING PLATES (1) to wall with SCREWS (2). POSITION OF MOUNTING BRACKET FOR TOWEL RING AND ROBE HOOK ■ CENTER LINE DRILL З PILOT HOLES FOR WOOD SCREWS (г) OR 1/B" DIA. HOLES FOR ANCHORS (4) POSITION OF MOUNTING BRACKET FOR DOUBLE ROBE HOOK AND TISSUE HOLDER 1 2 TOWEL RING INSTALLATION ■ Align accessory (A, B) and place ESCUTCHEON (1) onto MOUNTING BRACKET (2). Secure accesory with SET SCREW (3) using 2.5mm HEX WRENCH (4) supplied. (NOTE POSITION OF MOUNTING BRACKET.} 2 POSITION OF MOUNTING BRACKET FOR TOWEL RING AND ROBE HOOK 2 ROBE HOOK AND TISSUE HOLDER INSTALLATION Align accessory (C, D) and place ESCUTCHEON (1) onto MOUNTING BRACKET (2). Secure accesory with SET SCREW (3) using 2.5mm HEX WRENCH (4) supplied. (NOTE POSITION OF MOUNTING BRACKET.} 3 2 HOOK AND TISSUE HOLDER M968...
Эта инструкция также подходит к моделям:Принадлежности для ванной - 7010.19 (86.62 kb)
Принадлежности для ванной - 7010.21 (86.62 kb)
Принадлежности для ванной - 7010.23 (86.62 kb)