Оценок - , средний балл: ( )

Инструкция по эксплуатации Kidde, модель KN-COPP-B

Производитель: Kidde
Размер: 245.61 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

• Never use detergents or other solvents to clean the CO alarm. • Avoid spraying air fresheners, hair spray, paint or other aerosols near the CO alarm. • Do not paint the CO alarm. Paint will seal the vents and interfere with the sensor ability to detect CO. • Do not place near a diaper pail. Caring for your Kidde Battery PoweredCO Alarm (cont.) Move the CO alarm and place in another location prior to performing any of the following: • Staining or stripping wood floors or furniture • Painting • Wall papering • Using adhesives Storing the unit in a plastic bag during the above projects will protect the sensor from permanent damage. WARNING: As soon as possible, place the CO alarm back in its proper location to assure continuous protection from Carbon Monoxide poisoning. Accommodation spaces should be well ventilated when household cleaning supplies or similar contaminants are used. The following substances can affect the sensor and may cause false readings: Methane, propane, iso-butane, iso-propanol, ethylene, benzene, toluene, ethyl acetate, hydrogen sulfide, sulfur dioxides, alcohol based products, paints, thinners, solvents, adhesives, hair sprays, after shaves, perfumes, and some cleaning agents. Troubleshooting Guide Symptom Problem Action 1 chirp every 30 sec- See pages 16-17. onds with a red LED Batteries are low Battery Installation/ flash, digital units and need replacing. Replacement. display 1 chirp every 30 sec- Sensor or unit onds with a red LED Replace unit, malfunction. if necessary flash, digital units display The problems listed above are under normal operation conditions. Other error (Err) conditions could exist if, for instance, ambient conditions are outside normal operating range (see page 26), battery condition is less than optimal, etc. If you still have any additional questions regarding Err conditions, please call our Consumer Hotline at 1-800-654-9677. Frequently Asked Questions Wall Mounting Template Q. How many CO alarms do I need? A. There is no formula for determining how many CO alarms you will need. It all depends on the layout of your home, how many bedrooms you have, where the heat sources are, and where the fuel-burning appliances are located. The Consumer Product Safety Commission (CPSC) recommends installing at least one carbon monoxide alarm with an audible warning signal near the sleeping area. The International Association of Fire Chiefs (IAFC) also recommends UL listed carbon monoxide alarms – on every level of the home and in areas near appliances that are potential sources of CO. Q. Do I have to press the test button to get a CO reading? A. No. Your Kidde CO alarm continuously monitors the air for carbon monoxide. The CO alarm will alert you to the presence of CO automatically. To test the internal components and circuitry of your CO alarm, press the test/reset button. If you are going to mount your Kidde CO Alarm to the wall, you may use this template for exact placement of the two wall mount screws provided. For more information about mounting to the wall, please refer to page 8. 2.375" 24 25 Product Specifications POWER: Three AA batteries (supplied) SENSOR: Electrochemical carbon monoxide sensor ACCURACY: Each Kidde CO Alarm is calibrated to a CO concentration of 150 ppm (+/-25 ppm) in air, at 80°F (+/-10°F) and 40% (+/-3%) relative humidity. Depending on the ambient condition (temperature, humidity) and the condition of the sensor, the alarm readings may vary. The digital reading tolerances are: Ambient: 80°F(+/-10°F), atmospheric pressure +/-10%, 40%+/-3% relative humidity. READING TOLERANCE (OF DISPLAY READING) 0-999ppm +20% +15ppm TEMPERATURE: Operating range 40°F (4.4°C) to 100°F (37.8°C) MOUNTING: Accessories supplied for wall mounting and table top applications ALARM: 85+ dB at 10' @ 3.4 ± 0.5 KHz pulsing alarm SIZE & WEIGHT: 5.5" diameter x 1.4" depth/0.66 lbs. with batteries WARRANTY: Five-year limited warranty from date of purchase against defects in material and workmanship on the CO Alarm unit. Limited Warranty WARRANTY COVERAGE: THE MANUFACTURER WARRANTS TO THE ORIGINAL CONSUMER PURCHASER, THAT THIS ALARM WILL BE FREE OF DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF FIVE (5) YEARS FROM DATE OF PURCHASE. THE MANUFACTURER’S LIABILITY HEREUNDER IS LIMITED TO REPLACEMENT OF THE PRODUCT, REPAIR OF THE PRODUCT OR REPLACEMENT OF THE PRODUCT WITH REPAIRED PRODUCT AT THE DISCRETION OF THE MANUFACTURER. THIS WARRANTY IS VOID IF THE PRODUCT HAS BEEN DAMAGED BY ACCIDENT, UNREASONABLE USE, NEGLECT, TAMPERING OR OTHER CAUSES NOT ARISING FROM DEFECTS IN MATERIAL OR WORKMANSHIP. THIS WARRANTY EXTENDS TO THE ORIGINAL CONSUMER PURCHASER OF THE PRODUCT ONLY. Warranty Disclaimers: Any implied warranties arising out of this sale, including but not limited to the implied warranties of description, merchantability and fitness for a particular purpose, are limited in duration to the above warranty period. In no event shall the Manufacturer be liable for loss of use o...