While the programme is running, the indicator shows the amount of time before the programme ends. The time remaining is also adjusted to account for the temperature of the water supply and the number of dishes. Intensive drying function Activating the intensive drying function increases the temperature during the rinse- aid stage which gives better drying results. -Press and hold the programme button, and set the mains switch 1 to ON. -Release both buttons. Either 1 (ON) or 0 (OFF) flashes in th

Loading the dishwasher Scrape off any large amounts of left-over food. It is not necessary to rinse the dishes under running water. Place objects in the dishwasher in such a way that: -Items such as cups, glasses, pots/pans, etc. are stood upside down. -Curved items, or those with recesses, should be at a slant so that water can run off. -They are stacked securely and cannot tip over. -They do not prevent the spray arms from rotating while washing takes place. Cutlery Cutlery should always be in

D ISHWASHE. For your Safety This manual forms an integral part of the appliance. It must always be kept handy for reference. Read through all the instructions contained in this manual before using the dishwasher. Installation must be performed by a qualified technician, in compliance with the regulations in force, including the prevention and elimination of radio frequency interference. The dishwasher is designed for washing and drying dishes, anyother use shall be considered improper. The manuf

If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. K8 Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance. O If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. 53 This appliance is intended to be us

Select the arrow position depending on the water hardness, referring to the table. Water Hardness Clarke degrees °fH mmol/l Selector position Salt consumption (grams/cycle) Autonomy (cycles\2kg) 0 - 14 0 - 17 0 -1,7 / 0 / 14 - 36 18 - 44 1,8 - 4,4 "-" 20 60 36 - 71 45 - 89 4,5 - 8,9 MED 40 40 >71 >89 > 8,9 "+" 60 25 You don't know how hard the water in your home is? Ask the company that supplies water in your area. Salt Filling the salt container. Always use salt which is intended for dishwasher

Close the door: the cycle starts from the point at which it was interrupted. ! . . If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. It starts again from the point at which it was interrupted once the door has been shut or the electricity supply is restored. !" !". A successful wash also depends on the correct amount of detergent being used, as recommended by the manufacturer. Exceeding the recommended amount does not result in a more effective wash and

Instruction booklet DISHWASHER Contents English, 1 Installation, 2-5 Positioning and levelling Technical data Electrical connection Connecting the water supply Description of the appliance, 6 Overall view Control panel Loading the racks, 7 Lower rack Cutlery basket Upper rack Start-up and use, 8-9 Starting the dishwasher Washing options Wash cycles, 10 Wash cycle table Rinse aid and refined salt, 11 Loading the rinse aid Loading the refined salt Care and maintenance, 12 Shutt

This avoids blocking the filter, which would reduce the efficiency of the wash. If saucepans and frying pans are very dirty, allow them to soak before being washed. To make it easier to load your dishes, pull the baskets out. Multisystem baskets The dishwasher is fitted with upper, lower and cutlery baskets. They provide greater flexibility for loading dishes, making them more suitable for your specific needs. The basket handles can be removed for cleaning. Pull out the two fastening plugs, remo

Do not use an extension lead or multiple plug for connection to the electrical socket. . If your dishwasher is underneath a work surface with a hob. You must add thermal insulation to the top of the machine. 4 ADJUSTING THE FEET... It is essential that the door is closed and latched before stabilising the dishwasher. Ensure that the rear feet are adjusted so that the product is not sitting on the base of the machine. Adjust either clockwise or anti-clockwise as necessary to level. Then adjust ei

11 FP105-01 DWF35/34/33/30 12/02/2002 10:23 am Page 12 FILLING THE RINSE AID CONTAINER... The purpose of Rinse Aid is to prevent formation of water marks on tableware and utensils, and to ensure that glasses are clean and sparkling. Rinse Aid is consumed during the rinsing process. -To open the lid, press on the rinse aid (1) container lid and simultaneously lift the lid off the lug (2). -Pour the rinse aid into the filler hole until the level indicator turns dark. Rinse aid control. Low Rinse A