Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
You may see water vapor coming from vent during the rinsing and drying portion of cycle. The vent is closed during washing to hold moisture and sound inside. The vent opens during the last few minutes of the final rinse and remains open for drying. The drying option may be changed at any time during the cycle and affects only the drying period. Opening the door longer than one minute during the dry cycle cancels the selected dry program. Delay Start The DELAY START option allows you to delay starting your dishwasher up to 6 hours. Press the pad once for a 2-hour delay, twice for 4 hours or three times for 6 hours. A light will come on indicating the delay start hours and will remain on until cycle starts.To cancel the DELAY START option and begin the cycle before the delay period is over, press the START/CANCEL pad. To Cancel a Cycle You can cancel a cycle anytime during the cycle. Press START/CANCEL pad and the dishwasher will start a 90 second drain. At the end of the drain, select the desired cycle. Status Indicator Lights The WASHING light comes on at the beginning of cycle and remains on until the end of the main wash. The RINSING light will come on and remain on during the last two rinses of all cycles. The DRYING light indicates the drying portion of the cycle. The light will come on when either drying option is selected. The CLEAN light will come on at end of cycle and remain on until door is opened. Child Lock Controls To prevent children from accidently changing the dishwasher cycle or starting the dishwasher, lock the dishwasher controls by pressing and releasing the NO HEAT DRY pad, then pressing and holding the NO HEAT DRY pad for 5 seconds. The CONTROLS light will come on and no new selections can be made until the lock is released. To unlock the controls, press the NO HEAT DRY pad for 5 seconds until the CONTROLS light goes out. Electrical Power Interruption When first installed or when power has been interrupted, HI-TEMP WASH and NO HEAT DRY status lights will flash. To clear, press START/CANCEL pad. If power failure occurs during a cycle, it will be necessary to restart the dishwasher by resetting the cycle you want. 6 7 Preparing and Loading Dishes Dish Preparation Scrape away large pieces of food, bones, pits, toothpicks, etc. The continuous filtered wash system will remove remaining food particles. Burned-on foods should be loosened before loading. Empty liquids from glasses and cups. Foods such as mustard, mayonnaise, vinegar, lemon juice and tomato based products may cause discoloration of stainless steel and plastics if allowed to sit for a long period of time. Unless the dishwasher is to be operated at once, it is best to rinse off these food soils. • Load racks so that large items do not prevent the detergent dispenser from opening. • Check manufacturer's recommendations before washing items in question. • If the dishwasher drains into a food disposer, be sure disposer is completely empty before starting dishwasher. Do not cover funnel Loading the Top Rack Features and appearance of racks and silverware basket may vary from your model. Important: Do not cover the funnel when loading. The top rack is designed for cups, glasses small plates, saucers and bowls. Load glasses in top rack. Damage may occur if placed in bottom rack. Load plastic items in top rack only. Melting may occur if placed in bottom rack. Load items with open ends facing down for better cleaning and draining. Damage may occur if delicate items touch each other during dishwasher operation. Long-handled knives and utensils can be placed in top rack. Be sure nothing protrudes through the bottom of the rack to block rotation of middle spray arm. Some models have a fold-down cup shelf or a cup shelf/stemware holder. They can be used to load two levels of cups, juice glasses, and other short items. Stagger items on upper level so that water can reach all inside surfaces. Fold up to load tall glasses. 8 Loading the Silverware Basket Mix spoons, forks and knives to prevent nesting. Mixing items gives better cleaning and drying. For safety, load sharp knives and forks with handles up. Be sure nothing protrudes through bottom of basket or rack to block the spray arm. Do not mix silver and stainless to avoid damaging the silver finish. Adding a Dish To add or remove items after wash cycle starts: • Unlatch door and wait a few seconds until wash action stops before opening. • Add the item and wait a few seconds to allow cold air to slowly expand inside dishwasher. • Close door firmly to latch and resume cycle. Preparing and Loading Dishes (continued) Upper Rack Option LIGHT WASH—UPPER RACK option can be used to wash a wide assortment of items when you don't have a full load. Also, when the upper rack fills up with glasses and the lower rack is still empty, you don't have to wait anymore for clean glasses. Do not cover funnel Loading the Bottom Rack Features and appearance of racks and silverware basket may vary from your model....
Эта инструкция также подходит к моделям:Посудомоечные машины - 800 (1016.15 kb)
Посудомоечные машины - 800 (1016.15 kb)
Посудомоечные машины - 800 (1016.15 kb)
Посудомоечные машины - 800 (1016.15 kb)