Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
• The disc indicator rotates while the corresponding disc is being played. • The disc indicator goes off when the unit has detected that there is no disc on the corresponding disc tray. SVCD/VCD/CD playback sequence during Continuous play When 3 SVCDs, VCDs or CDs are loaded on the disc trays, they are played in one of the following sequences. • When DVD1 is pressed : DVD1 ] DVD2 ] DVD3 (then stops) • When DVD2 is pressed : DVD2 ] DVD3 ] DVD1 (then stops) • When DVD3 is pressed : DVD3 ] DVD1 ] DVD2 (then stops) * When only 2 SVCDs, VCDs or CDs are loaded, they are played in the same order, but the disc tray without a disc is skipped. * This function cannot be used for SVCD or VCD with the PBC function and DVD. Common Basic Disc Operations While playing a disc, you can do the following operations. To exchange discs during playback of another Press 0 corresponding to a disc, not playing or selected currently, to eject and exchange the disc. If you exchange discs during play, the current play will not stop. To stop play for a moment Press DVD 3.8 (or 8 on the remote control). While pausing, the elapsed playing time flashes on the display. To resume playing, press DVD 3.8 again (or press DVD 3 on the remote control). DVD Playback • To play back a SVCD, VCD or CD see page 21. • Playback will stop when a disc menu appears on the TV screen. If a menu appears while playing, see “Menu- Driven Playback” on page 23. 1Load discs. 2Select the disc number button you want to play. On the unit: Press one of the disc number buttons (DVD1, DVD2, or DVD3). On the remote control: Press one of the disc number buttons (DVD 1, DVD 2, or DVD 3) while holding down SHIFT. + The unit starts reading the disc contents and “DVD” is shown on the display. Then the total title number appears. • Playback starts from the first chapter of the first title and the disc number lamp starts flashing. – 19 – Continued While playing back a disc encoded with Dolby Digital, the DOLBY DIGITAL lamp on the front panel lights up. If it has multichannel signals—5.1ch, the Surround mode is automatically activated. While playing back an MPEG Multichannel disc, the Surround mode is automatically activated. • Using the on-screen menus, you can adjust the speaker settings for 5.1ch Surround mode depending on your room situation. (See page 40.) • While playing back a multichannel disc, the front left and the front right signals are output when— —hearing a disc through headphones. —hearing a disc through AUX OUT jacks. —recording onto tapes. • You can also confirm the current channel setting by pressing DISPLAY on the unit. (See page 51.) To stop playing, press 7. • This unit can memorize the stop point of DVD, and when you start playback again by pressing DVD 3.8 (or DVD 3 on the remote control), playback starts from the beginning of a chapter previously stopped—Resume play. To use Resume play, you need to turn on the Resume function. (See page 42.) • To stop completely, press 7 twice. To remove the disc, press 0 for the corresponding disc tray. To go to another chapter Turn 4 / . during playback (or press 4 or . on the remote control). • 4: Goes back to the beginning of the current or previous chapters. • .: Skips to the beginning of the next or succeeding chapters. To go to a particular title or chapter directly using the number buttons on the remote control • Pressing the number buttons before playback allows you to start playing from the title number you want. • Pressing the number buttons during playback allows you to start playing from the chapter number of the currently playing title you want. Ex.: To select number 5, press 5. To select number 10, press 10. To select number 20, press +10 then 10. To select number 23, press +10, +10 then 3. Current title number Current Chapter number Elapsed title playing time Title numbers of the currently playing disc. (Numbers exceeding 16 are not displayed.) To use Time Search and Chapter Search on the TV screen • You cannot use this function while using Random play. On the remote control ONLY: 1 Press PLAY MODE during play. The play mode screen appears. 2 Press CONTROL + or . to move to “TIME SEARCH” or “CHAP. SEARCH,” then press ENTER. “GO TO _: _ _:_ _ ” for Time Search or “GO TO CHAPTER = ” for DVD CONTROL REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH REPEAT CHAPTER GO TO CHAPTER = Chapter Search appears on the TV Ex.: When “CHAP. SEARCH” is selected. screen. 3 Enter desired playing time or chapter number by pressing the number buttons. • You can only use Time Search within a currently playing title. Ex.: To enter the time of “0:23:45,” press 0, 2, 3, 4 and 5. (Always enter all 5 digits.) To enter chapter number 23, press 2 and 3. To enter chapter number 3, press 3. To cancel misentry for Time Search, press CONTROL .. Each time you press the button the last number you entered is erased. (You cannot erase a chapter number.) 4 Press ENTER. The unit starts playback of the selected point. To erase the on-screen indication...
Эта инструкция также подходит к моделям:Посудомоечные машины - CA-MXDVB10 (3.4 mb)