Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
. If you switch from combined detergents to solo detergents, ensure that the water softening system and amount of rinse aid have been set to the correct value. Overview of programmes en / Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia. Type of utensils Type of soiling Programme Possible additional options Programme sequence Pre-rinse ± / ° Intensive 70° all Clean 70° Intermediate rinse Final rinse 65° pots and pans, non-sensitive utensils and cutlery very adhesive burned- in or dried-on food remnants containing starch or protein O * Intensive Smart 45° all Drying Pre-rinse Clean 45° Intermediate rinse Final rinse 69° Drying A Auto 45° -65° all Is optimised according to the soiling with the aid of sensors. A Auto 45° -65° all Is optimised according to the soiling with the aid of sensors. mixed utensils and cutlery part dried, common household food remnants a / a Eco 50° all Prerinse Clean 50° Intermediate rinse Final rinse 65° Drying sensitive utensils, cutlery, temperature- sensitive plastic and glasses slightly adhesive, fresh food remnants n / . Quick 45° Extra drying Clean 45° Intermediate rinse Final rinse 55° all types of utensils cold rinsing, intermediate cleaning u / o Prerinse none Prerinse en Additional options * The Intensive Smart 45° programme offers outstanding cleaning results even if utensils are heavily soiled. And this with an energy saving of up to 25% compared with the Intensive 70° programme. To benefit from these advantages, please use modern detergents which deploy their full cleaning power from 45 °C. These detergents are identified by the manufacturers accordingly. Programme selection You can select a suitable programme according to the type of utensils and degree of soiling. Information for test institutes Test institutes receive the information for comparability tests (e.g. according to EN60436). These are the conditions for conducting the tests, however these are not the results or consumption values. Request by e-mail to: dishwasher@test-appliances.com The product number (E no.) and the production number (FD) are required which you can find on the rating plate 92 on the appliance door. 0 Additional options * depending on model Additional options can be set with the buttons X. Y Express Wash/ Speed Perfect/ (VarioSpeed) * This function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display h. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased. § Half load * If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load. · Hygiene * The temperature is increased during the cleaning process. This increases the hygiene status. This additional option is ideal for cleaning e.g. chopping boards and baby bottles. Operating the appliance en I Intensive zone * Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly. . Extra drying * An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better. There is a slight increase in the energy consumption. 1 Operating the appliance Programme data The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹…. Different influencing factors such as e.g. water temperature or line pressure may result in deviations. Aqua sensor * * depending on model The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water. The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3–6 litres. If the turbidity is greater, the water is drained and is replaced with fresh water. In the automatic programmes the temperature and running time can also be adjusted to the degree of soiling. Switching on the appliance 1. Turn on the tap fully. 2. Open the door. 3. Switch on ON/OFF switch (. The Eco 50° programme display flashes. This programme remains selected if no other programme button 0 is pressed. The expected programme duration flashes on the digital display h. 4. Press the START button `. 5. Close the door. The programme starts running. en Operating the appliance Note -for environmentally friendly operation of the dishwasher: For ecological reasons the Eco 50° programme is preset whenever the appliance starts. Thi...
Эта инструкция также подходит к моделям:Посудомоечные машины - 3VT530XA/11 (1.25 mb)
Посудомоечные машины - 3VT530XA/14 (1.25 mb)