Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
All rights reserved. Printed in U.S.A. 2 Operating Instructions (continued) The Smart Soil Sensor checks the soil level on your dishes in the Ultimate Scrub, SpeedClean, Normal and Glasses cycles. Depending on soil level, the sensor will determine if additional water fills are needed to clean the dishes or if water fills can be deleted. Cycle time and water usage will vary based on the amount of soil on the dishes. Cycle time will also vary based on the options selected and the incoming water temperature. Note: Not all cycles available on all models. Cycle Chart Cycle To Select Cycle Soil Level Water (approx.) Time* (hours) Washes/ Rinses For pots, pans, casseroles and dinnerware with dried-on or baked-on soils. Ultimate Scrub Select ULTIMATE SCRUB and desired OPTIONS. HI-TEMP WASH and SANITIZE will automatically be provided. Heavy and Medium gal. imp. gal. liters 9.9 8.2 37.5 2 1/4 2 washes 6 rinses Light gal. imp. gal. liters 7.3 6.1 27.6 2 2 washes 4 rinses SpeedClean A fast wash for lightly soiled dishes and silverware. Select SPEEDCLEAN and desired OPTIONS. 6.1 5.1 23.1 gal. imp. gal. liters 3/4 2 wash 3 rinses For regularly soiled dishes and silverware. Normal Wash Select NORMAL WASH and desired OPTIONS. Heavy gal. imp. gal. liters 7.3 6.1 27.6 2 2 washes 4 rinses Medium gal. imp. gal. liters 6.1 5.1 23.1 1 3/4 2 washes 3 rinses Light 4.9 4.1 18.5 gal. imp. gal. liters 1 1/2 2 washes 2 rinses Extra Light gal. imp. gal. liters 3.7 3.1 14.0 1 1/4 1 wash 2 rinses For lightly soiled china andcrystal. China Crystal Select CHINA CRYSTAL and desired OPTIONS. gal. imp. gal. liters 6.1 5.1 23.1 1 1/2 2 wash 3 rinses For lightly soiled or pre-rinseddishes and silverware when you do not have a full load. Glasses or Top Rack Select GLASSES and desired OPTIONS. gal. imp. gal. liters 3.7 3.1 14.0 3/4 2 wash 2 rinses For lightly soiled and pre-rinsed dishes and silverware. Eco Wash Select ECO WASH and desired OPTIONS. Heavy gal. imp. gal. liters 6.1 5.1 23.1 1 1/2 3 wash 2 rinses Medium and Light gal. imp. gal. liters 4.9 4.1 18.6 1 1/2 2 wash 2 rinses For rinsing dishes that willbe washed later. Rinse Only Select RINSE ONLY. DO NOT USE detergent. gal. imp. gal. liters 2.4 2.0 9.1 1/4 2 rinses * Includes dry time. 5 Operating Instructions (continued) Options Selections Wash Pressure (available on select models) The WASH PRESSURE option allows you to select the desired wash pressure depending on your dishload. When HIGH WASH PRESSURE is selected, the wash pressure is increased by 30% to provide faster and more effective cleaning. When LOW WASH PRESSURE is selected, the wash pressure is decreased by 30% to clean delicate dishes without damage. HIGH WASH PRESSURE can be used with all cycles except CHINA CRYSTAL and RINSE ONLY. HIGH WASH PRESSURE is automatically provided when ULTIMATE SCRUB or SPEEDCLEAN cycles are selected. LOW WASH PRESSURE can be used with all cycles except SPEEDCLEAN and RINSE ONLY. LOW WASH PRESSURE is automatically provided when CHINA CRYSTAL is selected. WASH PRESSURE may be selected before the wash cycle is started, or anytime during the wash cycle. Hi-Temp Wash When HI-TEMP WASH option is selected, the dishwasher heats water in the main wash to approximately 140°F (60°C). This increase in water temperature helps dishwasher detergent remove food grease and soil from dishes more effectively and aids in drying. This option is available in NORMAL WASH and GLASSES. HI-TEMP WASH is automatically provided when ULTIMATE SCRUB cycle is selected. Sanitize Option To sanitize your dishes and glassware, select the SANITIZE option. When selected, the light above the pad will come on and remain on until end of cycle. The water temperature in the final rinse will be raised to 155°F (68°C) assuring bacteria is destroyed. This option is available in NORMAL WASH and GLASSES. SANITIZE is automatically provided when ULTIMATE SCRUB is selected. Only these sanitization cycles have been designed to meet NSF requirements. The cycle time will be extended until the proper water temperature is reached. Washing action will continue during the water heating delay. For best results, the incoming water temperature should be at least 120°F (49°C). The sanitize criteria may not be satisfied if there is an interruption of the cycle, power failure or if the incoming water temperature is below 120°F (49°C). To turn off the SANITIZE option, press the pad a second time. The light above the pad will turn off. Heated Dry The HEATED DRY option in combination with rinse aid will enhance drying performance. HEATED DRY option is available on all cycles except ECO WASH & RINSE ONLY. You may see water vapor coming from the vent during the drying portion of cycle. The vent is closed during washing to hold moisture and sound inside. The vent opens during the last few minutes of the final rinse and remains open for drying. The drying option may be changed at any time during the cycle and affects only the drying period. Opening the door longer...
Эта инструкция также подходит к моделям:Посудомоечные машины - 4000 (2.72 mb)