Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
(4.27 m) Optional soundproofed cab w/integral ROPS/ FOPS Vandal protection w/built-in locks ADD VERSATILITY WITH: Mechanical front-wheel drive with: Offset driveshaft for better ground clearance Extendable dipperstick Self-adjusting hydraulic wet-disk brakes Inboard planetary final drives Transaxle 1st and 2nd collar shift, 3rd and 4th synchronized Full-power-shift reverser Torque converter Single-lever loader control Two-lever backhoe control Two-lever stabilizer control with anti-drift lockouts Multi-adjustable swivel seat Unitized frame — pin-on backhoe Isolated engine and operator's station Walk-in front entry Designed-in quietness Open-center hydraulic system O-ring face seal hydraulic plumbing Weight distributed for working stability 210С BACKHOE LOADER SPECIFICATIONS Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE Standards. Except where otherwise noted, these specifications are based on a unit with 14.9-24, 6 PR. R4 rear tires; 7.50-16, 10 PR. F3 front tires, 0.88 cu. yd. (0.67 m3) loader bucket, 24-in. (610 mm) standard-duty backhoe bucket, ROPS/FOPS, full fuel tank, 175 lb. (80 kg) operator and standard equipment. Rated Power @ 2200 rpm: SAE DIN 70 020 Net .........................55 hp (41 kW) 43 kW Gross .......................58 hp (43 kW) Net engine power is with standard equipment including air cleaner, exhaust system, alternator, and cooling fan, at standard conditions per SAE J1349 and DIN 70 020, using No. 2-D fuel @ 35 API gravity. No derating is required up to 6000 feet (1800 m) altitude. Gross power is without cooling fan. Engine: John Deere 4-239D Type ................4-stroke cycle, naturally aspirated diesel Bore and stroke..............4.19 x 4.33 in. (106.5 x 110 mm) No. of cylinders.......................................4 Displacement ......................... 239 cu. in. (3.917 L) Maximum net torque @ 1200 rpm . 158 Ib-ft (214 Nm) (21.8 kg-m) 20 percent torque rise Cooling fan.....................................Suction Compression ratio...............................17.8 to 1 Lubrication ........Pressure system w/full-flow filter and cooler Main bearings........................................5 Air cleaner.........................................Dry Electrical system .................................12 volt Alternator .....................................51 amps Torque Converter: Single stage, dual phase, overrunning stator, 11-in. (280 mm) diameter, stall torque ratio 2.78:1 Reverser: Modulated, full-power shift with multiple wet-disk clutches. Reverser operating lever at left of steering wheel. Transmission: Manual shift with first and second speeds having sliding collar engagement and third and fourth speeds engaged with cone-type synchronizers. Single shift lever, floor mounted. Forward Reverse Travel Speeds: Gear mph (km/h) mph (km/h) With standard 14.9-24 1 3.3 5.3 3.2 5.2 rear and 7.50-16 2 5.6 9.0 5.5 8.9 front tires 3 12.0 19.3 11.9 19.2 4 21.9 35.2 21.8 35.1 With MFWD and 16.9-24 1 5.4 8.7 5.3 8.5 (required) rear and 12.00- 2 5.7 9.2 5.6 9.0 16.5 front tires 3 12.3 19.8 12.2 19.6 4 22.4 36.1 22.3 35.9 Final Drives ........................... Planetary, inboard Service Brakes: Hydraulic, applied with separate pedals; hydrauli-cally equalized when both pedals are depressed. Wet disks and facings are fully enclosed and self-adjusting. Secondary Brake: Mechanical “V" groove band located on differential ring gear Steering: Hydrostatic power Steering axle, regular: Turning radius (brake applied) ............9 ft. 4 in. (8.59 m) Clearance circle (brake applied)..........27 ft. 4 in. (8.33 m) Steering wheel turns, left to right......................2.2 right to left......................2.9 Axle oscillation stop to stop ......................22 deg. Mechanical front-wheel drive (engaged): Turning radius (brake applied) ...............10 ft. (3.05 m) Clearance circle (brake applied)..............29 ft. (8.84 m) Steering wheel turns, left to right......................2.3 right to left......................2.8 Axle oscillation stop to stop ......................22 deg. Hydraulic System: Open-center Pressure, main relief ......2500 psi (17 238 kPa) (175.8 kg/cm2) Pump .......................................Gear type Flow @ 2200 rpm........................24 gpm (1.51 Us) Filter, return oil ... 10 micron, steel-enclosed replaceable element Hydraulic Cylinders: Bore Stroke Rod In. (mm) In. (mm) In. (mm) Loader boom (2)..... 2.76 70 30.8 782 1.77 45 Loader bucket (1) .... 2.76 70 28.1 715 1.75 40 Backhoe boom (1). . .. 3.94 100 34.9 886 1.97 50 Backhoe crowd (1) ... 3.54 90 33.0 838 1.77 45 Backhoe bucket (1) ... 3.15 80 31.0 788 1.77 45 Backhoe swing (2) ... 3.15 80 27.4 226 1.77 45 Backhoe extendable dipper (1)........... 2.50 64 48.0 1220 1.25 32 Backhoe stabilizers (2) 3.54 90 15.5 394 1.77 45 Steering (1) regul...