Оценок - 0, средний балл: 4
(
)
)
|
Фрагмент инструкции
1. 3. 7.8.9.4.5.6. A. G. B H. C. D. I. E. F. 10. ' .. Indoor/Outdoor Memory Thermometer Monitor: A. Day of the Week B. Battery Icon C. Outdoor Temperature D. Indoor Temperature E. Recorded Highest Temperature and Date F. Recorded Lowest Temperature and Date G. Signal Detection Icon H. Date I. Time 1. Max/Min Button 2. History Button 3. Clear Button 4. (+) Button 5. Set Button 6. (-) Button 7. Re-sync Button 8. .C/.F Button 9. Reset Button Remote Sensor : 10. Reset Button Before You Begin 1.0 Set up procedure: 1. Insert batteries into the monitor first and then press the RESET button once. 2. Place the monitor as close as possible next to the remote sensor and insert the batteries into the remote sensor and press the RESET button. IMPORTANT: The calendar and clock must be set up first before the monitor can receive a signal from the remote sensor. (See section 3.0) 3. Position the monitor and remote sensor within effective transmission range, which in usual circumstances is 30 to 45 meters. The range is affected by the building materials and where the monitor and remote sensor are positioned; try various locations for the best results. NOTE: The remote sensor should be placed in a shaded area for accurate readings. 1.1 Getting Started Once the remote sensor has been powered up (or the RESET button has been pressed), you must set up the calendar and clock first, after setup the transmission signal is sent to the monitor. The monitor will attempt to search for the signal for 5 minutes. Once the signal is received, the dashes (--.-°F) on the monitor will change to the current outdoor temperature. If after 5 minutes the screen does not change to show the outdoor temperature, press the RE-SYNC button on the monitor. The monitor will now attempt to search for the signal for another 6 minutes. 2.0 Troubleshooting 2.0 Troubleshooting Press the RESET button at any time your display shows dashes (--.-°F) and/or ensure that the remote sensor is in direct line to the monitor. If the outdoor temperature cannot be received, check: 1. The distance between the monitor or remote sensor should be at least 0.9 to 1.2 meters away from any interfering sources such as computer monitors or TV sets. 2. Avoid placing the monitor onto or in the immediate proximity of metal window frames. 3. Using other electrical products such as headphones or speakers operating on the same signal frequency (433MHz) may prevent correct signal transmission and reception. 4. Neighbors using electrical devices operating on the 433MHz signal frequency can also cause interference. 5. Signals from other household devices, such as door bells and home security systems, may temporarily interfere with the units and cause reception failure. The transmission and reception of temperature reading will resume once the interference has stopped. The maximum transmission range is 45 meters from the remote sensor to the monitor (in open space). However, this depends on the surrounding environment and interference levels. The temperature signal travels in a straight line from the remote sensor to the monitor. The signal will not curve around an object. If no reception is possible, despite the observation of these factors, all units will have to be reset. 1. Press and hold the SET button to activate the calendar setup mode. 2. Press the + or – button to toggle to the correct year. 3. Press the SET button to confirm. 4. Follow steps 2-3 to set the date, time and 12hr/24hr mode. NOTE: To reset unit please see Set up Procedure. (See section 1.0). 3.0 Calendar and Clock Setup 4.0 Recorded Highest and Lowest The recorded highest and lowest outdoor temperature will always be displayed on the screen. When the outdoor temperature becomes higher or lower than the current record, the display immediately updates to the new record. This data will be retained in the units memory even if the battery is removed or unit is reset. IMPORTANT: The recorded highest and lowest temperature is stored by date, therefore the calendar MUST be set correctly before use of the unit. 5.0 Five Year History The unit will store the daily Max/Min records of outdoor temperature for up to 5 years. 1. Press and hold the HISTORY button until the calendar starts to flash. 2. Press the + or – buttons to toggle to the desired year and then press the HISTORY button to confirm. 3. Repeat step 2 to set the desired month and date. 4. The Max/Min recorded measurement of outdoor temperature for that specific date will be displayed for 5 seconds. 5. If there is no recorded measurement for that date, --.-°C or --.-°F will be displayed. ) NOTE: Five years of data will be retained even if the battery is removed or the unit is reset. After five years the oldest data will be replaced with the newest recorded temperature data. 6.0 Year to Date History The unit can also recall the recorded Max/Min outdoor temperature of the same date last year, 2 years ago, and so on. Example: if today.s date is 03/25/07 the unit will recall...