Оценок - 4, средний балл: 3 ( )

Производитель: Roberts Gorden Размер: 7.2 mb Название файла: Язык инструкции:

2.3 National Standards and Applicable Codes All appliances must be installed in accordance with the latest revision of the applicable standards and national codes. This refers also to the electric, gas and venting installation. Note: Additional standards for installations in public garages, aircraft hangars, etc. may be applicable. SECTION 3: CRITICAL CONSIDERATIONS SECTION 3: CRITICAL CONSIDERATIONS 3.1 Required Clearances to Combustibles Clearances are the required distances that combustible objects must be away from the heater to prevent fire hazards. Combustible materials that may catch fire include common items such as wood, paper, rubber, fabric, etc. Maintain clearances to combustibles at all times for safety. Clearances for all heater models are located on the burner of the heater and on Page 3, Figure 1 through Page 6, Figure 10 in this manual. Check the clearances on each burner for the model heater being installed to make sure the product is suitable for your application and the clearances are maintained. Read and follow the safety guidelines below: • Keep gasoline or other combustible materials including flammable objects, liquids, dust or vapors away from this heater or any other appliance. • Maintain clearances from heat sensitive material, equipment and workstations. • Maintain clearances from vehicles parked below the heater. • Maintain clearances from swinging and overhead doors, overhead cranes, vehicle lifts, partitions, storage racks, hoists, building construction, etc. • In locations used for the storage of combustible materials, signs must be posted to specify the maximum permissible stacking height to maintain . 1"2". , '4# #"#! - 5 ! "#. # !". 7 " -",,"' '4#0 3% " *" !. 3% #""# #,'%' "" -, !". "% - ! %# #" % "!. 4% "," . required clearances from the heater to the combustibles. Signs must be posted adjacent to the heater thermostat. In the absence of a thermostat, signs must be posted in a conspicuous location. • Consult local Fire Marshal, Fire Insurance Carrier or other authorities for approval of proposed installation when there is a possibility of exposure to combustible airborne materials or vapors. • Hang heater in accordance to the minimum suspension requirements on Page 10, Figure 12. • If the radiant tubes must pass through the building structure, be sure that adequate sleeving and fire stop is installed to prevent scorching and/or fire hazard. NOTE: 1. All dimensions are from the surfaces of all tubes, couplings and elbows. 2. Clearances B, C and D can be reduced by 50% after 25' (7.5 m) of tubing downstream from where the burner and burner tube connect. FIGURE 1: STANDARD REFLECTOR Model A (inches) B C D A (centimeters) B C D CTHN-40 5 20 41 20 13 51 104 51 CTHN-60 5 27 51 27 13 69 130 69 CTHN-80 5 30 58 30 13 76 147 76 CTHN-100 5 32 60 32 13 81 152 81 CTHN-125 5 35 65 35 13 89 165 89 CTHN-150 5 39 71 39 13 99 180 99 CTHN-175 8 44 74 44 20 112 188 112 CTHN-200 8 47 76 47 20 119 193 119 CTHN-SERIES INSTALLATION, OPERATION AND SERVICE MANUAL NOTE: 1. All dimensions are from the surfaces of all tubes, couplings and elbows. 2. Clearances B, C and D can be reduced by 50% after 25' (7.5 m) of tubing downstream from where the burner and burner tube connect. . FIGURE 2: ONE SIDE REFLECTOR . . . Model A (inches) B C D A (centimeters) B C D CTHN-40 5 6 46 35 13 15 117 88 CTHN-60 5 6 55 44 13 15 140 110 CTHN-80 5 6 64 49 13 15 163 123 CTHN-100 5 6 66 51 13 15 168 128 CTHN-125 5 6 69 58 13 15 175 145 CTHN-150 5 6 75 60 13 15 191 150 CTHN-175 8 6 77 68 20 15 196 170 CTHN-200 8 6 79 70 20 15 201 175 FIGURE 3: TWO SIDE REFLECTORS . . . Model A (inches) B C D A (centimeters) B C D CTHN-40 5 16 47 16 13 41 119 41 CTHN-60 5 18 56 18 13 46 142 46 CTHN-80 5 21 65 21 13 53 165 53 CTHN-100 5 23 68 23 13 58 173 58 CTHN-125 5 26 73 26 13 66 185 66 CTHN-150 5 30 76 30 13 76 193 76 CTHN-175 8 32 88 32 20 81 224 81 CTHN-200 8 33 90 33 20 84 229 84 FIGURE 4: 45° TILT REFLECTOR Model A (inches) B C D A (centimeters) B C D CTHN-40 8 4 35 43 20 10 89 109 CTHN-60 8 4 45 45 20 10 114 114 CTHN-80 9 4 54 55 23 10 137 140 CTHN-100 10 4 57 56 25 10 145 142 CTHN-125 10 4 63 58 25 10 160 147 CTHN-150 10 4 66 61 25 10 168 155 CTHN-175 10 4 69 68 25 10 175 173 CTHN-200 10 4 73 71 25 10 185 180 SECTION 3: CRITICAL CONSIDERATIONS NOTE: 1. All dimensions are from the surfaces of all tubes, couplings and elbows. 2. Clearances B, C and D can be reduced by 50% after 25' (7.5 m) of tubing downstream from where the burner and burner tube connect. FIGURE 5: U-TUBE, STANDARD REFLECTOR Model A (inches) B C D A (centimeters) B C D CTHN-40 - UNAPPROVED - UNAPPROVED CTHN- 60 5 27 56 19 13 69 142 48 CTHN-80 5 30 61 20 13 76 155 51 CTHN-100 5 32 63 20 13 81 160 51 CTHN-125 5 35 66 20 13 89 168 51 CTHN-150 5 39 73 21 13 99 185 53 CTHN-175 8 44 75 26 20 112 191 66 CTHN-200 8 47 76 30 20 119 193 76 FIGURE 6: U-TUBE, 45° . . . . Model A (inches) B C D A (centimeters) B C D CTHN-40 - UNAPPROVED - UNAPPROVED CTHN- 60 8 4 47 40...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: