Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Important safety information
Electrical and grounding safety
Installation safety
Impor
WARNING
WARNING
To reduce the risk of fire, electric shock, personal injuries, and/or death, observe
To reduce the risk of fire, electric shock, personal injuries, and/or death, observe
t
ant saf
the following precautions.
the following precautions.
• Plug the range into a grounded 3-prong outlet.
• Have your range installed and properly
• Do not remove the ground prong.
grounded by a qualified installer, in accordance
e
ty inf
• Do not use an adapter or an extension cord.
with the installation instructions. Any
• Do not use a damaged power plug, power cord,
adjustment and service should be performed
ormation
or loose power outlet.
only by qualified gas range installers or service
• Do not modify the power plug, power cord, or
technicians.
power outlet in any way.
• Do not attempt to service, modify, or replace your range or any part of your
• Do not put a fuse in a neutral or ground circuit.
range unless it is specifically recommended in this manual. All other service
• Use a dedicated 120-volt, 60-Hz, 20-amp, AC electrical circuit with a time-delay fuse
should be referred to a qualified technician.
or circuit breaker for this range. Do not plug more than one appliance into this circuit.
• Always use new flexible connectors when installing a gas appliance. Do not use
• Do not connect the ground wire to plastic plumbing lines, gas lines, or hot water
old flexible connectors.
pipes.
• Make sure the anti-tip device is properly installed on the range. See the
• This range must be Earth grounded. In the event of a malfunction or breakdown,
installation instructions for more information.
grounding will reduce the risk of electrical shock by providing a path for the electric
• Due to the size and weight of the range, have two or more people move the
current. This range is equipped with a cord having a grounding plug. The plug must
range.
be firmly plugged into an outlet that is properly installed and grounded in accordance
• Remove all tape and packaging materials.
with the local codes and ordinances. If you are unsure whether your electrical outlet
• Remove all accessories from the cooktop, oven, and/or lower drawer. Grates and
is properly grounded, have it checked by a licensed electrician.
griddles are heavy. Use caution when handling them.
• The range is supplied with a 3-pronged grounded plug. This cord must be plugged
• Make sure no parts came loose during shipping. Do not install in an area exposed
into a mating, grounded 3-prong outlet that meets all local codes and ordinances.
to dripping water or outside weather conditions.
If codes permit the use of a separate ground wire, we recommend that a qualified
• Make sure your range is correctly installed and adjusted by a qualified service
electrician determine the proper path for this ground wire.
technician or installer for the type of gas (natural or LP) you will use. For your
• Electrical service to the range must conform to local codes. Barring local codes,
range to utilize LP gas, the installer must replace the 5 surface burner orifices
it should meet the latest ANSI/NFPA No. 70 – Latest Revision (for the U.S.) or the
and 2 oven orifices with the provided LP orifice set, and reverse the GPR adapter.
Canadian Electrical Code CSA C22.1 – Latest Revisions.
These adjustments must be made by a qualified service technician in accordance
• It is the personal responsibility of the range owner to provide the correct electrical
with the manufacturer’s instructions and all codes and requirements of the
service for this range.
authority having jurisdiction. The qualified agency performing this work assumes
the gas conversion responsibility.
6 English
...