Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
If the flame goes out Switch off the control knob. Wait one minute and switch the burner on again. : Risk of fire! If the flame goes out, gas will escape. Never leave the gas burner unattended during operation. Ensure that there are no draughts. Switching off the oven gas burner Turn the control knob to the U position. Press and hold down the control knob while doing so. Operating the grill The appliance door must be closed when grilling. Notes ¦ It is not possible to use the oven gas burner and the grill at the same time. ¦ When using the grill, a cooking time of 60 minutes must not be exceeded. ¦ When switching on the grill, the drive for the rotary spit is automatically activated. Switching on the grill Press the control knob for the oven and turn it to the G position. The indicator light will light up when the grill is switched on. Switching off the grill Turn the control knob to the U position. Operating the rotary spit The rotary spit can be used with excellent results to cook joints, such as rolled roasting joints and poultry. The meat is roasted thoroughly and evenly. The drive for the rotary spit is automatically activated as soon as you switch on the grill. Preparing roasts 1. Place the joint as centrally as possible on the rotary spit and secure it at both ends with the retaining clips. You can also secure the joint using kitchen twine. 2. With poultry, bind the ends of the wings underneath the back and the thighs against the body. This prevents them from overbrowning. 3. Pierce the skin on the underside of the wings to allow the fat to escape. Inserting the rotary spit : Risk of burns! Never touch the hot surfaces of the cooking compartment or the heating elements. Children must be kept at a safe distance from the appliance at all times. Open the appliance door carefully. Hot steam may escape. 1. Insert the rotary spit shelf at level 2 as far as it will go. 2. Slide the rotary spit into the motor mount in the back wall of the cooking compartment (a). 3. Place the rotary spit on the rotary spit shelf (b). Note: The rotary spit must engage correctly in the rotary spit shelf. 4. Unscrew the handle (c). ...... 5. Pour water into a baking tray and slide the baking tray into shelf position 1 to collect the drips of fat. 6. Close the appliance door. Switching on the rotary spit Turn the control knob for the oven to the Gposition. Switching off the rotary spit Turn the control knob for the oven to the U position. Removing the rotary spit : Risk of burns! Never touch the hot surfaces of the cooking compartment or the heating elements. Children must be kept at a safe distance from the appliance at all times. Open the appliance door carefully. Hot steam may escape. : Risk of burns! Never touch the rotary spit or other accessories directly when they are hot. Always wear oven gloves or heat-resistant gloves when handling hot accessories. 1. Carefully open the appliance door and screw the handle back onto the rotary spit. 2. Carefully pull the rotary spit from the mount in the back wall and remove it. 3. Remove the rotary spit shelf and the baking tray. Operating the timer The timer runs independently of the oven. Setting the cooking time 1. Turn the control knob clockwise as far as the stop. 2. Turn the control knob anti-clockwise until you reach the required cooking time. An audible signal sounds once the time has elapsed. Care and cleaning With good care and cleaning, your oven will remain clean and fully-functioning for a long time to come. Here we will explain how to maintain and clean your oven correctly. Notes ¦ Slight differences in the colours on the front of the oven are caused by the use of different materials, such as glass, plastic and metal. ¦ Shadows on the door panel which look like streaks, are caused by reflections made by the oven light. ¦ Enamel is baked on at very high temperatures. This can cause some slight colour variations. This is normal and does not affect their function. The edges of thin trays cannot be completely enamelled. As a result, these edges can be rough. This will not impair the anti-corrosion protection. : Risk of electric shock! Do not use any high-pressure cleaners or steam cleaners, which can result in an electric shock. : Risk of burns! The appliance becomes very hot. Never touch the interior surfaces of the cooking compartment or the heating elements. Always allow the appliance to cool down. Keep children at a safe distance. Cleaning agents To ensure that the different surfaces are not damaged by using the wrong cleaning agent, pay attention to the information in the table. Do not use ¦ sharp or abrasive cleaning agents, ¦ cleaning agents with a high alcohol content, ¦ hard scouring pads or cleaning sponges, ¦ high-pressure cleaners or steam cleaners. Wash new sponge cloths thoroughly before use. Area Cleaning agents Oven front Hot soapy water: Clean with a dish cloth and dry with a soft cloth. Do not use glass cleaners or glass scrapers. Stainless steel Hot soapy w...
Эта инструкция также подходит к моделям:Плиты - HG10LE150/02 (1.33 mb)